Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: phaxz10 on April 14, 2012, 08:30:21 AM
-
hi guys!
i basically want to mod my psp and attach a 4mm speaker using this diagram:
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fbeardmods.com%2Facidmods%2Ftuts%2Fpsp%2Frgarja%26%23039%3Bs%2520psp%2520diagrams%2Fpsp%2520phat%2520sound%2520mod.png&hash=d68cf77a79425d21c8fabfebb4eb25eeba137589)
but i dont know where to attach the speakers...
and do i need to add wires or change the resistors??
btw, i will use 11 leds and im new in modding
please help me guys! :beg:
thanks in advance!! :tup:
-
do you want to use the LM386 as a Sound Amplifier?
then do something like this, just put in a speker where the leds + and - goes..
and dont double post:
anyone??????
-
thank you for the answer sir.. and sorry for double posting.. but how many LEDs the amp can support??
-
this is a QUOTE from JUMBO
They can run the amount you are planning.
I think they can run way over 30...
i haven't tested myself, but that's from a trusted source ^^
-
thanks for the answer again mr luigus!! i can start my modding now!! thank you very much!!
-
thanks for the answer again mr luigus!! i can start my modding now!! thank you very much!!
haha its my pleasure!
have fun! :tup:
-
sir please help me accomplish this mod.. i like to make my other 9 LEDs 'non-sound reactive'.. please correct my diagram and list all the necessary things to have like resistors or anything.. :beg:
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi40.tinypic.com%2F35ldwza.png&hash=8e3288f62aa294c2b548ebbf00722baa95507110)
-
How many leds are gonna go into this PSP!? :whoosh:
lol, if you want other leds non sound reactive that diagram is correct, you may need to add the appropriate resistor for your LED's, or you can use a different power source.. Since leds normally run on about 2-3 V, i suggest using a different power source. Search on google for a site that calculates the amount of ohms needed to get the led on its right voltage.
Theres a 3.6V next to the plug where the charging port goes into the motherboard, you can user that
-
ok sir.. i will try... but i dont know ho to use led resistor calculator :sadno:
-
add a 100 ohm resistor between the 5V source and the leds, that should be enogh. :tup:
-
How many leds are gonna go into this PSP!? :whoosh:
by my count... 20. 11 sound and 9 allways on
-
by my count... 20. 11 sound and 9 allways on
Gonna take alot of wiring
-
hi there.. is it normal that the IC becomes hot after turning on the PSP?? and i don't have 191k and 30k,, can i replace it with 180k and 33k??
by my count... 20. 11 sound and 9 allways on
11 blue LEDs only sir..
-
if i wanted more than 2 sound reactive lights could i jus add more pos and neg leads from where the existing trigger leds are connecting to the lm386?......
Also can the lm386 do 2 functions at once?..... meaning can som lights attached to it b sound reactive and others not or will they all do the same thing
-
if i wanted more than 2 sound reactive lights could i jus add more pos and neg leads from where the existing trigger leds are connecting to the lm386?......
yes
Also can the lm386 do 2 functions at once?..... meaning can som lights attached to it b sound reactive and others not or will they all do the same thing
no, wire your soild state leds direct. (using a resistor and or switch)
[admin]
this is a few months old, go back to your other post.[/admin]