Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Xbox 360 Soft mods / JTAG support => Topic started by: XeXJTAGmodz on April 24, 2012, 04:09:47 PM
-
so i got a rgh slim from 3D0. It doesnt really have the best boot times but i can live with that. But now it is not even booting after leaving the console on for over 20min. Could someone please help. It would be much appreciated.
-
so i got a rgh slim from 3D0. It doesnt really have the best boot times but i can live with that. But now it is not even booting after leaving the console on for over 20min. Could someone please help. It would be much appreciated.
what have you changed? usually if you changed something it takes a while to reboot.. dont ask me why but it does... have you opened it? might of hit the switch and turned it to program instead of normal or you might have flipped it from slim to fat , if you have had it opened.
-
i havent opened it. But it not booting is not making me very happy.
-
i havent opened it. But it not booting is not making me very happy.
Have you made any changes? taken the hard drive out? made any changes with in the console? give me full details I understand its not booting.
-
Have you made any changes? taken the hard drive out? made any changes with in the console? give me full details I understand its nto booting.
I hsvent taken out the HDD or anything. The only thing different thing i did was put snes360 on it last night and played a few wmulators. It was working fine then
-
unplug it and plug everything back in power cord that is and try that, also make sure the av cables are switched right... unless you have it on hdmi
-
unplug it and plug everything back in power cord that is and try that, also make sure the av cables are switched right... unless you have it on hdmi
i have unpluggged it (power cycle) the console numerous times. and then turned it on and it still wont boot.
-
could be possible one of the wires , either on the Orange wire, which is the STBY_CLK stand by clock for booting, near the hana chip or the cpu_rst line might have come off...
I would contact 3D0 see if he can help or ... if this has accured and you can solder , then I would say try to resolder it, (BUT IF YOU CAN"T THEN I WOULD SUGGEST GETTING SOMEONE WHO CAN)
these solder points are really delicate and can rip traces or even pul them off the board.
-
could be possible one of the wires , either on the Orange wire, which is the STBY_CLK stand by clock for booting, near the hana chip or the cpu_rst line might have come off...
I would contact 3D0 see if he can help or ... if this has accured and you can solder , then I would say try to resolder it, (BUT IF YOU CAN"T THEN I WOULD SUGGEST GETTING SOMEONE WHO CAN)
these solder points are really delicate and can rip traces or even pul them off the board.
Alright thanks for the help Rodent. He was telling me he might have to redo the cpu_rst point. He is not in town right now, but he said i coud drop it off at his house on friday.
-
Ok well if he can't i would be glad to do it for you but , shipping cost , both ways, plus whatever it takes to fix it.. let me know , also glad he is willing to help you get it fixed. keep me updated.,
-
Ok well if he can't i would be glad to do it for you but , shipping cost , both ways, plus whatever it takes to fix it.. let me know , also glad he is willing to help you get it fixed. keep me updated.,
Tanks for the help rodent. But i am sure 3D0 will take care of it. He just sent an email acouple of hours ago, and said it wouldn't take him long ot fix at all. But i'll be sure to keep you updated on the situation.
-
If you post a video maybe I could help you, I have done some RGH in slim
-
@ XeXJTAGmodz I just talked to 3D0 on the phone last night, He said he would take care of it, when he gets back in town... to me thats pretty impressive. A member taking care of his customer when there is an issue with a console he/she has sold... or any item in that fact. Glad to see also there wasn't any bad comments made and that this issue can be resolved... good luck.. should be fixed soon.. :hifive:
-
will be taken care of friday all i gotta do is change the cpu_rst wire
trust me
it will boot fine if my soldering was :censored: thing wouldnt boot at all
-
I use a wire of 45cm around the fan. Here is a vid showing how boot a slim i did
RGH XBOX 360 SLIM (http://www.youtube.com/watch?v=2L4z8seLHwA#ws)
-
will fix today soon as i receive it
-
will fix today soon as i receive it
Good job ;)
-
will fix today soon as i receive it
is it alright if i drop it off today??? Sorry i wasn;t able to last night
-
Fixed and returned feel free to leave good bad neutral feedback
-
Fixed and returned feel free to leave good bad neutral feedback
Good to see this is fixed , :)
-
Fixed and returned feel free to leave good bad neutral feedback
Thanks man. Will be sure to leave positive feedback :tup: