Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Go => Topic started by: mario_99 on June 03, 2012, 09:40:56 AM
-
just bought 2 psp go and they would not show anything on screen on 1 i fix the sound fuse and then the back light fuse and it work but the other one i bridge the back light fuse and nothing comes up can it be something else need help
-
Jw how much did you get these for? also you could try the lcd of the working one into the non working one and see if it does anything.
-
Jw how much did you get these for? also you could try the lcd of the working one into the non working one and see if it does anything.
both of the psps lcd work it just one of the motherboard that i bridge the back light fuse but nothing happen i got one working i have the other one for sale http://www.ebay.com/itm/251077439550?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 (http://www.ebay.com/itm/251077439550?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649)
-
im begining to think there is diffrent types of psp go motherboards. two of the types have the proper fuses to bridge in those cases. but the other one is diffrent, they either are not there or are in a diffrent spot.
you could try bridging a fuse near the processor and see if that helps.
-
im begining to think there is diffrent types of psp go motherboards. two of the types have the proper fuses to bridge in those cases. but the other one is diffrent, they either are not there or are in a diffrent spot.
you could try bridging a fuse near the processor and see if that helps.
where is the fuse next to the processor because the fuse i bridged its the same on both motherboards same spot
-
got them both working but one does not want to connect to my pc it says to connect it to a ps3