Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: peanutty421 on June 08, 2012, 02:56:41 PM
-
ok i wanna do the sound reactive mod with 4 trigger leds (1 blu 1 grn in each trigger) and would also like about 8-10 leds in my clear umd door (4-5 blu 4-5 grn) that would not be sound reactive, these would b controlled with a small slide switch. can all this be handled by the lm386 or do i need to wire the solid leds seperately? If there is someone who has done many leds before who is willing to help with the specifics that would be awesome!!!!
-
there are plenty of people here who can help.
the lm386 is a sound reactive chip. it will be used for the trigger leds.
wire the other solid leds directly to the power source through your switch and resistors.
-
ok to get started i wanna make sure im clear about the sound reactive triggers.....the diagram i found on here shows what i want except that i will be using a slide switch to control that is going in the umd area. his diagram shows only a neg going to the wifi switch how do i change so it is controlled by my switch and also how do i wire the additional leds into this arrangement
edit
ok i found where u answered about the extra leds in the triggers....thanks bro.....now can u help me out with wiring the switch lik i said i wanna use a dedicated switch that i am adding in the umd area to control these lights as opposed to using the wifi switch. also if im putting 8-10 leds on a 3v power supply do i need resistors im using 0603 grn and blu both say 3v forward voltage...sorry for the noob questions...i cant seem to find a diagram on multiple leds
[gmod] please do not double post[/gmod]