Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: peanutty421 on June 12, 2012, 03:56:05 PM
-
how do i wire a seperate switch in for my sound reactive led mod im using the lm386 and diagram from the tuts section but i jus wanna use a dedicated switch instead of the wifi........basically i am wondering where the neg that would go to the wifi switch goes and where to put the switch
-
Hello, friend.
It can go wherever you want it to go, remember that for a current to flow, there must be a complete circuit. For organization's sake it is generally put at the very beginning of a circuit but this is not always possible, if you want to control different lights etc. As far as the physical location. I would recommend a small switch on the back, where the CD tray used to be.
Can you post a link to that diagram you're talking about?
-
ok thanks alot for the switch info this is the wiring diagram i am refering to .......
http://beardmods.com/acidmods/tuts/psp/rgarja's%20psp%20diagrams/psp%20slim%20lm386%20sound%20mod.png (http://beardmods.com/acidmods/tuts/psp/rgarja's%20psp%20diagrams/psp%20slim%20lm386%20sound%20mod.png)
-
the neg can go to any neg point in the psp.
-
I am having trouble finding a small enough switch for my led's. I know the diagram for the posative and negative, but how would I incorperate a switch into the circut so I can turn the leds on or off? And does anyone have a good link for a small enough switch??
-
Something like this should work:
http://www.ebay.com/itm/10-Pcs-x-2-Position-DPDT-2P2T-Panel-PCB-Mini-SMD-Slide-Switch-6-Pin-0-5A-50V-DC-/360485309384?pt=LH_DefaultDomain_0&hash=item53ee994bc8#ht_1999wt_1270 (http://www.ebay.com/itm/10-Pcs-x-2-Position-DPDT-2P2T-Panel-PCB-Mini-SMD-Slide-Switch-6-Pin-0-5A-50V-DC-/360485309384?pt=LH_DefaultDomain_0&hash=item53ee994bc8#ht_1999wt_1270)
If you look around on some electronics whole-seller websites, you might be able to find something even smaller.