Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: Madman340 on August 17, 2012, 08:48:24 PM
-
I can't tell what controller I have... What else is there besides CG, CG2, Matrix, and Matrix 2? Because from the pictures I've seen it doesn't look like them.
It's more like a CG but it isn't the same as CG or CG2. On the right DPad button, the label SW15 is to the left of the contact, and directly under it is "PYKC C2X", with "94V-0" directly under that.
The comparison images of CG and CG2 show a horizontal resistor for CG and vertical for CG2, this one is horizontal.
I've taken a picture of the front and back, but I don't have a real camera so used my iTouch.
Front (http://i.imgur.com/BvekT.jpg)
Back (http://i.imgur.com/89V86.jpg)
The top and bottom connectors are spray painted black because they were originally in my white controller and I moved it into my black controller because I got some :censored:ty plastic parts from china that manage to somehow not work, even though they are just plastic. (They manage to stick and make :censored: buttons... I think it's from the lightness/:censored:ty manufacturing)
-
You have a Cg1. There an empty section that can be used with a soic 12f683 that's only present in the cg1.
-
yep that is a CG board, I cant see any differences
-
What's with the different labeling on the area I pointed out? (Dpad, right button) Are there minor differences like that for different batches?
-
yeah i guess the labeling is different for each batch, CG controllers are good for modding, they have holes in the board to route wires, switched voltage, and the empty 8pin footprint
-
here this can show you the types there are.. https://www.acidmods.com/forum/index.php/topic,24699.0.html (https://www.acidmods.com/forum/index.php/topic,24699.0.html)