Acidmods
AcidMods Resources ----- ( These are helpful tools for modding ) => Open Source Code & AcidMods Free Code => Topic started by: Layman on August 19, 2012, 12:38:55 PM
-
hi guys thanks for taking time to read this but im having a little problem with some code i just made, the thing is, is that im trying to mod an xbox 360 controller so that every second it pulls a button on the controller but for some reason it doesnt seem to pull it low and was just wondering if anyone could tell me how to make a pic 12f683 to simulate a button press for The B, X, Y, A, or start or back buttons for example. thanks for your help much appreciated and i will also post my finished code so that everyone else can use it for what ever they want! :hifive: :dribble: THANKS!!!!
-
It's just as easy (on a CG) as you mentioned...assuming you are tied to the correct side of the button.
You might try looking to see if some other functionality is "overriding" the Digital Output of the pin(s) you are using.
But most likely will just have to paste your code (or at least) a snippet to get proper support.
-
well as long as the pin is set to output and is connected properly then it is just a matter of low=pushed and high=released, for a cg atleast
-
what would i have to do if it is a matrix controller then?
-
what would i have to do if it is a matrix controller then?
Electrically connect the two sides of a pad...using something like a simple bipolar junction transistor or an analog switch.