Acidmods

AcidMods Resources ----- ( These are helpful tools for modding ) => Open Source Code & AcidMods Free Code => Topic started by: spooke on August 23, 2012, 12:12:52 PM

Title: CrazyModders 6 Mode on Matrix 2 ?
Post by: spooke on August 23, 2012, 12:12:52 PM

Just wondering, would the 6 Mode work on the Matrix 2 board ?
If so, how would the installation go ? same as the CG ones or Matrix ?
Should the Jumper still go like the Matrix from Pin1 to Pin4 ? Power point, same
as the CG boards.
Will Appreciate it, Thanks

Title: Re: CrazyModders 6 Mode on Matrix 2 ?
Post by: Modded Matt on August 23, 2012, 12:29:21 PM

it should wire just like the matrix.

Title: Re: CrazyModders 6 Mode on Matrix 2 ?
Post by: tempermodz on August 23, 2012, 01:38:20 PM

Should it be the same as the Matrix Matt ? The matrix 2 doesn't have the power source that the regular matrix does. Matrix 2 has power like the CG and CG2. Doesn't have it on the far part like the old one does.

Title: Re: CrazyModders 6 Mode on Matrix 2 ?
Post by: Modded Matt on August 23, 2012, 03:32:30 PM

I guess I should have been more clear. the buttons will wire the same. you will need an OC to switch the power on a matrix2 or pull the battery pack.

Title: Re: CrazyModders 6 Mode on Matrix 2 ?
Post by: spooke on August 23, 2012, 06:53:01 PM

I did it a few months ago, just regular, it worked normal. But just had it for a month, switched the mod afterwards