Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => Topic started by: Decus on August 25, 2012, 12:43:23 PM
-
Hey,
I have a question. I have seen that there are people who own PSP's with a second analog stick.
Can I order the conversion somewhere or even run?
There was again an extra motherboard for it, I think it was for the 2000 PSP. You can buy that?
with friendly greet Decus
-
hello decus!
the PSP dual nub is probably what you mean. Un fortunatly i do not know where you are able to get one anymore. I know the AcidMods Shop used to sell them but they do not anymore.
There is a few way to make one using a PSP 1000 nub. But it all depends on the version of PSP you have.
what version of the PSP do you currently own or want to preform this mod on?
-
Hey,
thanks for your answer. I have a PSP 1000 and Go.
I would also buy a 2000 or 3000, mainly due to the display. I would be open to anything.
What are the options for simple? =)
Sincerely Decus
-
you will need an a2d board, or a razor x board. both will be hard to find.
a2d board: (https://www.acidmods.com/moddedmatt/speaker1.jpg)
your only option might be to etch your own board like I have done here
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi587.photobucket.com%2Falbums%2Fss313%2FSilvaaa_%2FIMAG0054.jpg&hash=31b4b32bfe4c3494cbcd480a264f0bbaa7f053f4)
-
Hey,
thanks for your answer. Where am one of the two boards could get her or what should cost would / who knows maybe someone?
mfg Decus