Acidmods

AcidMods Resources ----- ( These are helpful tools for modding ) => Open Source Code & AcidMods Free Code => Topic started by: Layman on December 01, 2012, 07:15:58 AM

Title: Rapid fire hex, 8 mode, up/down feature, and auto burst
Post by: Layman on December 01, 2012, 07:15:58 AM

hi guys, i have another hex file to share, here is all the features of this rapid fire,
features are;

~8 modes
~Up/Down Feature
~burst and auto burst
~works on new black ops 2
~cod 5 mode 75% duty cycle
~uses Hazers GamePlayRF Circuit

~auto burst is burst fire but after each few shots it re-fires without need of releasing the trigger.
~up down feature, you can scroll up or down modes your choice, all you have to do is hold the right tactile button to go up or left to go down

here are the fire rates;

mode 1 ~ burst fire, 3 round burst
mode 2 auto burst, 3 round burst
mode 3 burst fire, 5 round burst 
mode 4 auto burst, 5 round burst
mode 5 slow mode
mode 6 slowish mode
mode 7 smr cod bo2
mode 8 fal bo2

LET ME KNOW WHAT YOU THINK! here is the down load link~~ http://www.gigasize.com/get/tgzs1dyondf (http://www.gigasize.com/get/tgzs1dyondf)

Title: Re: Rapid fire hex, 8 mode, up/down feature, and auto burst
Post by: 3D0kassiah on December 01, 2012, 09:15:39 AM

thanks for sharing
 :hifive:

Title: Re: Rapid fire hex, 8 mode, up/down feature, and auto burst
Post by: lovey on December 01, 2012, 10:04:48 AM

sounds and looks good thanks will let u know how i get on

Title: Re: Rapid fire hex, 8 mode, up/down feature, and auto burst
Post by: Layman on December 10, 2012, 03:40:32 PM

has anyone tried this yet? how did people get on? only thing i forgot to mention is that the auto burst doesnt work for a matrix but will update the file soon and will post later!

Title: Re: Rapid fire hex, 8 mode, up/down feature, and auto burst
Post by: RFK on January 20, 2013, 06:22:35 AM

Late reply, im wanting to test this out. How does this wire up, pinouts etc?

Title: Re: Rapid fire hex, 8 mode, up/down feature, and auto burst
Post by: Layman on January 20, 2013, 12:45:39 PM

Quote from: RFK on January 20, 2013, 06:22:35 AM

Late reply, im wanting to test this out. How does this wire up, pinouts etc?

goto either GamePlayRf or GamePlayRf2 post, then follow the wiring diagram on there, and if you do it correct, put this hex onto a chip put it into the circuit there you go.

Title: Re: Rapid fire hex, 8 mode, up/down feature, and auto burst
Post by: RFK on January 20, 2013, 05:59:19 PM

Thanks i'll test tomorrow. I just needed to know what schematic to follow

Title: Re: Rapid fire hex, 8 mode, up/down feature, and auto burst
Post by: jozecuervoo on January 21, 2013, 10:04:56 AM

What speeds did you set for  black ops 2 ?

Title: Re: Rapid fire hex, 8 mode, up/down feature, and auto burst
Post by: Fareham dave on February 05, 2013, 07:19:48 PM

any luck getting the burst mode to work on matrix? if i had a cg pad i would try this out.