Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => Legacy Consoles => Retro console modding => Topic started by: RDC on February 01, 2013, 10:42:37 PM
-
This schematic isn't what I'd consider 100% complete, as it doesn't include the Encoder Stick board, and the SMD component values aren't known right now. I could guess what most of them are, though that's not very accurate in my book. As far as what is connected to what goes though, it is accurate.
Note: This schematic also does not have the Jumpers shown, since they're just a way to get from one place to another by 'jumping' over a trace or from one part of the board to another part, so for all intents and purposes a jumper is the same as a trace, they're just not shown here is all.
200010 - https://www.acidmods.com/RDC/NINTENDO/N64/200010.pdf (https://www.acidmods.com/RDC/NINTENDO/N64/200010.pdf)
700010 - https://www.acidmods.com/RDC/NINTENDO/N64/700010.pdf (https://www.acidmods.com/RDC/NINTENDO/N64/700010.pdf)
Top scan of the main PCB with all components removed. (The bottom side has no components or traces, just 4 jumper wires, but those are marked on this side where they go. Also the L, R and Z button boards are simply Normally Open contacts like the rest of the buttons on the controller, so no real need to show them either)
200010 CLEAN
(https://www.acidmods.com/RDC/NINTENDO/N64/N64_Controller_200010_Top_CLEAN.jpg)
700010
(https://www.acidmods.com/RDC/NINTENDO/N64/N64_Controller_700010_Top.jpg)
700010 CLEAN
(https://www.acidmods.com/RDC/NINTENDO/N64/N64_Controller_700010_Top_CLEAN.jpg)