Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => Legacy Consoles => Retro console modding => Topic started by: RDC on February 01, 2013, 10:47:09 PM
-
A few scans of the Wavebird GC Controller PCB.
Note: The Wireless module is not shown here as there are 2 versions that I'm aware of. When I have both done up I'll update this with them.
Top of the board, all thru hole components removed.
(https://www.acidmods.com/RDC/NINTENDO/GC//WavebirdTop.jpg)
Top side with components removed and traces exposed. 50/50 composite from top side clean scan, so all traces can be seen, but also what their reference designations were.
(https://www.acidmods.com/RDC/NINTENDO/GC//WavebirdTopCLEANandSTRIPPED.jpg)
Bottom side the same
(https://www.acidmods.com/RDC/NINTENDO/GC//WavebirdBottomCLEANandSTRIPPED.jpg)