Acidmods

AcidMods Resources ----- ( These are helpful tools for modding ) => Open Source Code & AcidMods Free Code => Topic started by: Fareham dave on February 05, 2013, 07:36:54 PM

Title: cant get rf to work on matrix 1 or 2
Post by: Fareham dave on February 05, 2013, 07:36:54 PM

could my problems i been having with all th rf codes i try be to do with my diy jdm programmer? i have programmed a couple of flasher codes onto chips and that worked fine. it just seems all the rf codes i try have random instabilitys each time. I only have matrix 1 and 2 controllers aswell?

Title: Re: cant get rf to work on matrix 1 or 2
Post by: Modded Matt on February 06, 2013, 05:05:41 AM

doubtful.

Title: Re: cant get rf to work on matrix 1 or 2
Post by: Fareham dave on February 06, 2013, 05:36:32 AM

ok, with that ruled out i will fit flex or topfire again then and post up pics of my wiring if i can get my camera to work. i have flex fitted in a controller i did over a year ago on a matrix 1 that works fine, but it seems that i havnt been able to get any others to work since.

ok so i found this on xboxscene.com from RDC

"TP5 on this board is 0.5v off and 1.8v when on, versus the 0v/1.8v of the old Matrix."

And i found this on google aswell for the best power source, that my guess is 0v off/1.8v on

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1300.photobucket.com%2Falbums%2Fag94%2FDave_Cowell%2Fmatrix-2-xbox-360-controller-circuit-board-back_zps97e35a4e.jpg&hash=d1898c3dee5c4d56142c6262ee8720f7427cc2d3)