Acidmods
AcidMods Resources ----- ( These are helpful tools for modding ) => Open Source Code & AcidMods Free Code => Topic started by: 3D0kassiah on April 15, 2013, 02:56:35 PM
-
well ive always liked using toppbuzz's led flasher code but i thought to myself maybe i can do for a cleaner install
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1122.photobucket.com%2Falbums%2Fl536%2Fedokassiah%2Fsoic_zps1cbe4b00.jpg&hash=d2fc2b942da14a5fe570667646009a23d69e1694) (http://s1122.photobucket.com/user/edokassiah/media/soic_zps1cbe4b00.jpg.html)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1122.photobucket.com%2Falbums%2Fl536%2Fedokassiah%2F2udxmir_zpse01f1081.png&hash=cf641f13408ecb744c9b6c1a45245ecfb37eea37) (http://s1122.photobucket.com/user/edokassiah/media/2udxmir_zpse01f1081.png.html)
on hold until further notice
-
This Is Something I Might Be Interested In For My Class. You Think You Can Whip Up A Board For Soic As Well. My Class Is Learning How To Solder Smd Components.
-
This Is Something I Might Be Interested In For My Class. You Think You Can Whip Up A Board For Soic As Well. My Class Is Learning How To Solder Smd Components.
ahh really? ok will post up later lol just for u theo
-
You Dont Have Too. Lol, Was Just Thinking While Typing.
-
You Dont Have Too. Lol, Was Just Thinking While Typing.
already doing it
-
You The Man!!
-
Nice work and this makes it easy for the lazy person who doesnt want to put any effort in to soldering..... lol
-
Hehehe that's me
-
Hehehe that's me
still have to program the chip...lol and solder to the board and the leds.
-
I got bored so I designed my own :cool: (Keep in mind I only spent like 10 minutes on this, so it aint that great, and something minght not be wrong). What do yall think?
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi.imgur.com%2Fcad2s3g.jpg&hash=206c6ccc35fa937487906fd2cbe18e2f9386047c)
And 3DO, is this pad necessary?
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi.imgur.com%2FipjopN2.jpg&hash=166b5b83506bc05c2c6dec7d6001e34cc4197434)
-
:drunk: :drunk: :drunk:
-
no its not
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1122.photobucket.com%2Falbums%2Fl536%2Fedokassiah%2Fledflasher2_zps16bcc151.jpg&hash=38d43dbc642a8f965f6f6aeb90cfec12d870a999) (http://s1122.photobucket.com/user/edokassiah/media/ledflasher2_zps16bcc151.jpg.html)
happy? and just wondering why you would place the gnd so far apart like that?
ecstatic :tup:
But I was making everything really spaced out because I was just doing this to see if I actually remembered how to use diptrace(I had/have no intention of actually getting it printed). Here's a more compact version I just put together(its .36 square inches). Tbh it could still be smaller(You could just have 1 ground pad and wire the 4 led ground wires and the controller ground to it; and everything could still be closer together), but, meh, its not really necessary(you'd save like 5 cents printing it)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi.imgur.com%2FTxweUGZ.jpg&hash=e6c3572f8870068a33e445ecb2b63aff7cb66b61)
-
well thank you for sharing and for your input as of right now im happy with my design and i really dont care if anyone takes an interest or not
but for fellow members who do decide this is something they want ill be more then happy to help out
my mission here is to try and do my part i will release this for free to anyone who wants it i
-
im always interested in your projects 3do, especially if it benefits me on my school work.
-
I want a few of those!! Nice Job.
-
make it smaller and post the file so I can have them printed. you only need one ground, the led negatives can go directly to any ground on the controller. so the extra pads are not needed. also change the chip type to a soic package.
-
gonna remove thread with correct files and pix
-
Now make it smaller and more compact .... :tup: so it will fit behind the Motherboard.
-
Now make it smaller and more compact .... :tup: so it will fit behind the Motherboard.
it will fit behind the motherboard that thing is small
picture the size of those resistors there the same size as xbox controller leds
-
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1122.photobucket.com%2Falbums%2Fl536%2Fedokassiah%2Fsoic_zps5114b7c5.jpg&hash=ed3e7edb097f7bd7f87af1db69838a564f01ff3e) (http://s1122.photobucket.com/user/edokassiah/media/soic_zps5114b7c5.jpg.html)
smallest i could get the board which is dam small
removed gnd pads and switched from dip to soic
resistor size is now 0603 not the original 0805
comments
good concept make it so its programmable right on the board . will be easy to change from fader to flasher... lol :tup: awesome work :D
-
Love it!
-
Just A Suggestion, You Can Run A Vias For The Bottom Left Resistor To Its Pad. Rather Than Run A Trace Along The Bottom Of The Board.
-
that would add a layer adding to the printing cost.
-
i thought of the same thing matt, but i just check the price at osh park. it cost the same $1.35 per set of 3.
-
dont think oshpark takes single sided boards
i managed to get it single layer but kept rejecting it until i added a via and bottom trace
plus i think there biggest thing is how big the pcb is not much how complex it is
-
i do have one question though, the diagram from ghost says 150 ohm resistor. but in the topbuzz thread for this code. it says 100 ohms. would either be fine?
-
i do have one question though, the diagram from ghost says 150 ohm resistor. but in the topbuzz thread for this code. it says 100 ohms. would either be fine?
try either one
files and pic is fixed enjoy
-
thanks for the reply and awesome on the fact that you will release a dip package as well
-
Could make these yourself if you have a laser printer? and the stuff to etch ?
-
yes most radio shack have the supplys to do it
ill do a print preview and post it and you will need a drill to drill out the via the circle thing
-
thinking about doing this.
-
Top buzz led flasher (http://www.youtube.com/watch?v=-oPCUl6yP8A#)
a short video i did of the code on a pic12f683 with the install diagram. still waiting on the boards to get in.
-
here is the completed soic version
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1337.photobucket.com%2Falbums%2Fo670%2Ftheodor613%2FIMG_20130504_161353_249_zps58462c98.jpg&hash=81e4b3a51c1d8d197f23442001add85113c85b1d)
-
Love it. Gotta get me a couple. one day lol
-
let me know, vision, i can have it pre-assemble for you.
-
looking good Gizmo
-
Thanks Rodent, Im Gonna Be Selling These And Donating Some If The Money To 3Do, So He Can ContiNue Make These Great Boards.
-
here is the led flasher and a proto led board i asked 3do to make for me.
Led flasher with prototype led board. (http://www.youtube.com/watch?v=e3KGKPtWm4g#)
-
Nice!! I wonder if it will power a 12v strip?
-
With The Right Resistor You Can Use A 12V Strip.
-
when can we hae a sample? of the board?
-
I think what 3D0 told me was 10 bucks for a populated board...
-
Im Gonna Put Together One Kit Consisting Of 1 Flasher And 2 Led Boards. They Will Be Populated With The CorreCt Resistor AccordiNg To The Led Color. It Will Be About $30 Shipped. Gotta Factor In The Total Cost And Shipping. Then Ill Get A Real Figure.
-
Cool. Keep uis posted on prices! I want to get one of the rf boards he made done also.
I have the flasher chip coming I hope so maybe I can talk 3d0 down a little
-
Im Gonna Put Together One Kit Consisting Of 1 Flasher And 2 Led Boards. They Will Be Populated With The CorreCt Resistor AccordiNg To The Led Color. It Will Be About $30 Shipped. Gotta Factor In The Total Cost And Shipping. Then Ill Get A Real Figure.
THat is how much the pulse vu2 sold for.
-
Led Flasher Fully Populated, Led Board Fully Populated Shipped For $25. Each Addtionally BOard Leds Is $5 Populated. Pulsevu Doesnt Come With Leds, Just 3 Extra Modes Fader, Music Pulse And Breather Effect.
-
rodent we didnt forget about u lol got new stuff coming dont worry
gonna talk to gizmo soon and ima go by whatever his prices are as far as i go im only doing all this for donations so whatever members or whoever wanna donate to me is cool so i can continue to do little projects here and there and the reason im asking for donations personally so i can order pcb's and test test and test im gaining more by learning so in the end its cool
only thing that sucks is i wish i can order in huge amounts so everyone can play with them but due to personal reason i dont have much funds to play around with nowadays....growing up sucks lol
ima let gizmo take it away
-
yeah, im trying to earn money to help 3do out.
-
oh i like i like. iteresting. need to try this one day..
-
just to clear things up when i say donations i dont mean send me 10 20 30 bucks even if its a dollar or 2 itll add up in turn willl let me buy more pcbs
-
here is the first mod i did with topbuzz led flasher
XBOX 360 CONTROLLER MOD WITH RF (http://www.youtube.com/watch?v=LMhWuBs34wk#)