Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: snowcolt17 on May 10, 2013, 01:15:12 PM
-
So... I decided I wanted to try rgloader. I made the nand to flash. I dumped my nand i had. i also have another copy on disc thanks to rodent.
I wanted to take the short way and try doing it through 360flash. it worked.. somewhat
Here is my problem. If i have my retail hdd in it works. If i have my rgh hdd in it doesnt. I have delted the dashlaunch, fsd and any other plugins.
And when i try to access the dashboard it says something like try to redownload it at xbox.com.
and i cant get my nand reader to work when i solder it on...
oh and its a slim trinity. and xell doesnt want to flash anything
-
Hmmm. Definately Need Rodent Help Here. I Never Messed With Rgloader.
-
He should have asked the master before attempting it lol. I can help you but I am sure rody will be around before to long..
-
1st thing you need to do is flash back the UPDFLASH.bin that was orignally the hacked freeboot image, see if the console will boot back up on its normal RGH DASHBOARD!
2nd you need to put the Nanddump1.bin make a copy of it and load it in RGLoader add the cpu key and build the nand. it will automatically build the RGLoader nand. " YOu MUST RENAME THE NANDDUMP1.BIN TO nand.bin" then build the RGLoader nand in RGLoader
then go to J-runner . Open your source file that you built the nand in RGLoader and load the nand it built . and write the nand to the motherboard... before booting make sure you have all the files needed on the HDD before booting it. If you need help doing this we can do it on Team Viewer or on SKYPE.
also once you have loaded this on the console you will not be able to update the dashboard past 16202.
-
Yea but my NAND reader errors out when trying to read
Or write.
Idk. Can't flash I'm xell or nothing I'm the rgloader NAND
-
Yea but my NAND reader errors out when trying to read
Or write.
Idk. Can't flash I'm xell or nothing I'm the rgloader NAND
give us J-runner log and if your having a issue with the nand reader not reading and writing then something possible bridged or you dont have the nand reader wired correctly you can also do lpt port.
any issues you can download new version here and you can read the pdf for any issues your having but j-runner log would help. if your having a issue with RGLoader then might need to redownload RGLoader and run it again. only other thing would be is that you powered it on with usb and nand read connected to console ,and ruined the nand reader/writer
http://website.j-runner.net/ (http://website.j-runner.net/)
-
hmmm idk im going to wait until tomorrow to mess with it i think. leave it to me to mess it up
Filechecks disabled - No Filechecks carried out
Version: 01
Flash Config: 0x00000000
Can not Continue
Version: 01
Flash Config: 0x00000000
Can not Continue
Initializing nanddump1.bin..
Nand Initialization Finished
Version: 01
Flash Config: 0x00000000
Can not Continue
made a lpt cable. i did install the diode on pin 11.. and my cable is a bit long. i am on win7 x64 and nandpro cant detect flash controller.
-
need to use lib win32 for 64 bit. if that doenst fix it then there is a problem with the connection to the xbox to the nand reader.
http://www.libusb.org/wiki/libusb-win32 (http://www.libusb.org/wiki/libusb-win32)
-
hmm let me try that.
-
hmm let me try that.
I can help thru team veiwer or Skype where you can share screen if needed.
-
fixed.
Even though i couldnt get to the main dash. or flash with lpt or usb nand reder.
i took my retail hdd. put xexmenu on it and the nand rodent orginally flashed. and used simple nand flasher and worked perfect.
thanks for the help
future refernce dont try to flash the rgloadr nand through 360flasher..
-
.future refernce dont try to flash the rgloadr nand through 360flasher..
NEVER DO THAT ...lol