Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: jayjaymozza on December 14, 2013, 01:37:23 PM
-
Hi, I got a controller from a friend, it has the red ROL mod done but as soon as the battery pack out in the controller the red LEDs light up very dull until your acutally press the guide button and turn the controller on.
Here is what it looks like when just battered are in and controller is off
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fs28.postimg.org%2Fwycrsbr55%2Fimage.jpg&hash=6544895f55beb39209b5d7452929784053a841d2) (http://postimg.org/image/wycrsbr55/)
Any ideas why it's doing that?
-
check your wiring . check for bridged solder point or something is touching when you put the controller back together,
-
Cheers rodent I'll have a check and see what's what
I havnt done any wiring in it and also the led solder joints look fine
[admin]You been warned about this mulitple times !! do not double post !! click edit to modify last time done telling you!!! [/admin]
-
1: Use The Edit Button.
2: This Is A Common Issue When Swapping Out The Rol, I Believe As I Had A Controller Do This. Just Simply Disconnect The Controller.
-
You have a Matrix version PCB, and some of them just do that, even with the stock Green LEDs.