Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => Legacy Consoles => Retro console modding => Topic started by: Chi-kitory on December 15, 2013, 08:36:01 AM
-
I have a broken GBA AGB-001 that needs it's shoulder buttons replaced. I'm talking about the actual switch buttons the L and R pieces touch on the circuit board. I bought what I though was the closes resemblance of them and re-soldered them to the board but the button housing and the button's mechanical trigger switch do not line up. The housing is too big to fit in a case and the switch isn't long enough for the L and R pads to touch it. Here's what i've done so far.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi283.photobucket.com%2Falbums%2Fkk317%2FChi-kitory%2FScreenShot2013-12-15at113432AM.png&hash=b4cc7e3fd301d96966776f94baf6e5f090026696) (http://s283.photobucket.com/user/Chi-kitory/media/ScreenShot2013-12-15at113432AM.png.html)
So It's looking the easiest solution to fixing this to find the exact buttons that the AGB-001 used. Does anyone know what that would be?
Cheers.