Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: xxiamdrewxx on December 23, 2013, 03:37:15 AM
-
Looking to purchase an executer ck3 pro kit and probe to firmware my dg16d2s but cannot seem to find them anywhere am I missing something? I mean worse case scenario I will j tag it but just looking for the easy way out. any help in advance would be greatly appreciated. I dont know if they are discontinued or what... From what I read you could previously purchase them here but I am not seeing them anywhere thanks!
-
http://www.ebay.com/itm/Xbox-360-Lite-on-0800-with-Xecuter-CK3-Pro-Probe-3-XT-Adapter-/201008093325?pt=US_Video_Gaming_Replacement_Parts_Tools&hash=item2ecd04188d (http://www.ebay.com/itm/Xbox-360-Lite-on-0800-with-Xecuter-CK3-Pro-Probe-3-XT-Adapter-/201008093325?pt=US_Video_Gaming_Replacement_Parts_Tools&hash=item2ecd04188d)
if that isnt what you need i can flash your drive for you
-
I actually saw that one but did not way to pay or a drive as well. Alas I was going to go back and buy it but the auction had ended so it is back to the drawing board... I had let a friend use this xbox and apparently he went and updated it on me so now it looks like I am now stuck with the rgh route. There also looks like there is a new product (to me) called x key I may try any thoughts?
-
no reason to rgh the console if you just want it flashed also you could just make a probe if needed. xk3y idk haven't really used one and I could flash the drive if needed. if the console was updated then it should be fine depends what dash it was on when it was flashed
-
Well figured it out the ck3 pro is discontinued and has been replaced with the ck3i or ck3i lite! Thanks for the help!