Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Go => Topic started by: kurokxp on December 23, 2013, 07:23:33 PM

Title: LED heat?
Post by: kurokxp on December 23, 2013, 07:23:33 PM

I plan to put a LED under the volume button since the light glows thru the cable and it looks good. The LED generates alot of heat though. Should I be worried?

Later:
Finished it up and looks cool.

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi.imgur.com%2FDue8SDV.jpg&hash=433055dd387500df366b6205ec0f6649673315e7)

Title: Re: LED heat?
Post by: 3D0kassiah on December 23, 2013, 08:52:20 PM

um yes its generally bad if the led generates alot of heat mainly means itll work but itll eventually burn out and you will have to replace it
did you try using a resistor or how did you hook it up?

Title: Re: LED heat?
Post by: kurokxp on December 23, 2013, 09:01:25 PM

I didnt use resistors, this is hooked up to the battery connector cause I couldnt find any points to put the led.

Title: Re: LED heat?
Post by: 3D0kassiah on December 23, 2013, 09:05:43 PM

try this use the correct resistor for your led
ive used 1206 and 0805 leds as there small and pack a big punch

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1122.photobucket.com%2Falbums%2Fl536%2Fedokassiah%2FWlan_Switch_Mod_zps4e617331.jpg&hash=6e0173b894169a95e9afd0d0ff1583b8f047138f) (http://s1122.photobucket.com/user/edokassiah/media/Wlan_Switch_Mod_zps4e617331.jpg.html)

Title: Re: LED heat?
Post by: kurokxp on December 23, 2013, 09:29:41 PM

Okay Thanks, this image helps alot. And by bridge just take anywire place it on both pins and just solder it?

Title: Re: LED heat?
Post by: 3D0kassiah on December 23, 2013, 09:34:27 PM

yes you can also snip off the leg of a resistor cut it down to size and just bridge it or you can use wire same thing