Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => Nintendo Wii => Wii Controllers / Wii Rapid Fire Controllers => Topic started by: rafaliyo86 on January 02, 2014, 11:34:43 AM
-
Hi guys
A friend of mine carried his console to a shop becuase the stick didn´t work right (I don´t know why he didn´t made use of the warranty). After a few days the shop gave him the console back and told him that they couldn´t fix it.
We decided to fix it and once we opened it we realized the PCB was damaged. Here are two pics:
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1099.photobucket.com%2Falbums%2Fg385%2Frafaliyo86%2F4B1B0DC5-6DA9-49E7-AB2A-7D5E8D5E35A0_zpscurqetpr.jpg&hash=1dde6c58d2a4f3d33fb84856fe20bffd20024e3e)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1099.photobucket.com%2Falbums%2Fg385%2Frafaliyo86%2F16867E57-FF31-493C-9340-B34A87A198FE_zpsgaouf7g1.jpg&hash=2ac709d9d31524daa6e9dfa37375c2643e78464e)
I have tried to find a replacement with no luck :(
Do you know if there is any place to get it? becuase i don´t know if it would be possible to make a pcb for it
Thanks in advance
-
After Seeing That, I Would The Shop Pay For A New One. They Damaged It.
-
It was some months ago so I suppose they won´t pay :(
-
It wouldnt be that hard to fix the board if you had the new stick.
-
It wouldnt be that hard to fix the board if you had the new stick.
I have it, its like a PS3 stick
-
Clean it up as best you can.
Install the new Stick and anything that doesn't work (the Y-Axis for sure isn't going to) wire it up directly to the connector.
1 - Ground
2 - X-Axis
3 - Voltage
4 - Y-Axis
5 - Stick Button
-
Thanks for the replies guys.
RDC these pins are of the conector but I would have to know what are in the stick. I just have to follow the traces right?
-
Yes, follow the traces, it's all right there.
-
Ok, the last question I have its about Voltage, what's the point in the pcb? (I can't see it in the picture and i don't have the pcb here now)
-
No idea what that means.
It's pin 3 on the connector. Look at both sides of the PCB and follow the traces thru the Vias, can even do it from the pics.
-
In this side this would be the points (I believe GROUND would go where I mark)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1099.photobucket.com%2Falbums%2Fg385%2Frafaliyo86%2FWiiUControllerStickBoard_zpsa627473e.jpg&hash=7e7551c22799e34a7ffdf568ae474a7b38bdd0bc)
But VOLTAGE would go on the other side to the PCB?
-
1 is Ground
3 is Voltage
The same as they were when I first replied.
Going by that picture
POT on the Left - Top is Voltage, Middle is Axis, Bottom is Ground.
POT on Top - Left is Ground, Middle is Axis, Right is Voltage.
-
I missundertood you sorry. It would be like this?
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1099.photobucket.com%2Falbums%2Fg385%2Frafaliyo86%2FWiiUControllerStickBoard_zps7775b50d.jpg&hash=a706fcc4376c98b1f0cab33fca1edfb68b6d5c2b)
-
That's exactly how it is. They just use traces on both sides of the PCB to do it.