Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: 3D0kassiah on January 25, 2014, 09:06:50 AM

Title: diy led rings
Post by: 3D0kassiah on January 25, 2014, 09:06:50 AM

hey guys after trying to source some led rings to do led thumbsticks it was a complete fail
decide to make my own but my measurements were way off they were to dam huge
can any assist me on finding out the correct measurements so i can try again
i need it to be in mm as its easier for me
i dont have a xbox controller atm to take measurements
plus my girls are out shopping for the day and i have tons of free time today
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi1122.photobucket.com%2Falbums%2Fl536%2Fedokassiah%2Fxbox-360-controller-thumb-stick-joystick_zps5e79f03e.jpg&hash=484da5aff9120a90d3533bbda0c60ba79aca6cde) (http://s1122.photobucket.com/user/edokassiah/media/xbox-360-controller-thumb-stick-joystick_zps5e79f03e.jpg.html)

Title: Re: diy led rings
Post by: RDC on January 25, 2014, 10:29:28 AM

For the 360 controller's sticks the PCBs will need an ID of 12mm, then an OD of 20.5mm or so. They will also need to be made from the 0.6mm size PCB material or Flex.

Title: Re: diy led rings
Post by: Modded Matt on January 27, 2014, 07:35:23 AM

I am interested in these if we can make them affordable.  It will need to incorporate a voltage regulator atleast or a charge pump to step up the voltage would even be better.

Title: Re: diy led rings
Post by: 3D0kassiah on January 27, 2014, 02:16:37 PM

still working on this