Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Tutorials => Topic started by: F4LL3NH3ART on February 04, 2014, 12:35:27 AM

Title: How to wire up external buttons for your Xbox360 slim (useful for casemods)
Post by: F4LL3NH3ART on February 04, 2014, 12:35:27 AM

Hey guys, So I've quickly made a little YouTube tutorial which basically shows me testing and demonstrating exactly which pins you need to solder to if you wish to make a custom case mod which will have momentary push switches,
this could range from wiring up PC buttons from a PC case, or as I am doing, ordering your own and building it by yourself.


My Main reason in making this tutorial is to basically just show you guys how simple it is, There was a pin out floating around, but I know a lot of people won't attempt something until they know it works,
I hope this inspires you guys to make all sorts of wonderful things.
My current project is essentially a Xbox 360 and Ps3 combined into one case, with a flip out monitor. I will make a thread on how I have done it all upon completion.


How to solder on external buttons for a custom 360 slim case mod (http://www.youtube.com/watch?v=VWi7Vhej8BU#ws)

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fgyazo.com%2F284a0f938f7ced664c0af161699c0282.png&hash=ef5634622f9eecd3f1a7bc1dc333513b4ea2f2e6)

Title: Re: How to wire up external buttons for your Xbox360 slim (useful for casemods)
Post by: 3D0kassiah on February 04, 2014, 06:00:11 AM

good info  :tup: