Acidmods

Acid Mods Community Area => Discussion Boards => General Discussion => Topic started by: WHITE 4ND N3RDY on March 26, 2014, 07:48:40 PM

Title: Just received my XB1 prototype boards!
Post by: WHITE 4ND N3RDY on March 26, 2014, 07:48:40 PM

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fs16.postimg.org%2Fq45nopeo1%2FIMG_20140326_193854_926.jpg&hash=94e729e3bb9009fea7a1ac56be055f614c20b1ad) (http://postimg.org/image/q45nopeo1/)

I finally got my boards! Still got a lot of work ahead of me but thought I'd show off the bare PCB board!

Title: Re: Just received my XB1 prototype boards!
Post by: Rodent on March 27, 2014, 08:36:11 AM

Nice  cant wait to see when you get one completed and installed   keep us updated!

Title: Re: Just received my XB1 prototype boards!
Post by: Modded Matt on March 28, 2014, 05:01:03 AM

What are you running on them?

Title: Re: Just received my XB1 prototype boards!
Post by: WHITE 4ND N3RDY on March 28, 2014, 08:21:35 AM

Dual 12f1822 I/P chips for XB1 rapid fire/mods. They opperate independently but are routed to save wiring and space.

The LT,RT,V,G & led are basically shared connections with the main chip. The second chip just clones these connections on the first chip.

The chips operate off two 6×6×7 mm tacts. Each tact controls each chip. The modes on each chip compliment each other to work as one unit with 100s of different combinations. That's pretty much it in a nut shell.

I have still a lot of work. I have to get registered on eBay have my brother help me make a portfolio ( I'm not very computer savy) Then become RBST here. I Dont want to get too in detail but when I complete these following steps I'll show everyone what I've been working on!


(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fs30.postimg.org%2F6y85vdh25%2FIMG_20140328_163241_855.jpg&hash=d9c7c733841f5ff308ae6829110dff54712a5790) (http://postimg.org/image/6y85vdh25/)


This is my completed setup. Just showing pics for now. Like I said works in progress. I have to finish the rest of my requirements before I can go to production.

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fs12.postimg.org%2Fpmu2rpbop%2FIMG_20140328_165023_554_1.jpg&hash=bd2be3c76989a3a216778871c8a5391283e7c171) (http://postimg.org/image/pmu2rpbop/)