Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: getweird on December 15, 2014, 10:36:20 PM
-
So I was removing an led with my solder iron and accidentally burned off a contact point. Is there any way to repair that, or possibly still get a connection? Any help at all on the subject will be appreciated! Thanks guys!
-
any way you can get a good picture of what you did? they really help, but generally you can follow the trace back a little bit and scratch off the green coating to the copper and with some flux and wire u can extend the trace where you need it
-
Here's a couple pictures. I hope it helps...the lighting is :censored:, but that's all I had to work with :/
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fs29.postimg.org%2Fx56phttz7%2FWP_20141216_001_1.jpg&hash=65d0bf821a86858f18c5e172e760727d8869858a) (http://postimg.org/image/x56phttz7/)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fs24.postimg.org%2F4wtz2m7jl%2FWP_20141216_003_1.jpg&hash=3b87cb10a9f6f32987b47e9054f419182ea358d0) (http://postimg.org/image/4wtz2m7jl/)
-
you worked that board over pretty good lol... yea u see the little traces that lead to where the pads should be, scratch the green off and expose the copper, use some flux and solder some wire on there and use tht to connect ur leds
-
https://www.acidmods.com/forum/index.php/topic,41737.msg319311.html#msg319311 (https://www.acidmods.com/forum/index.php/topic,41737.msg319311.html#msg319311)
-
what he said ^^ :tup:
-
You guys are probably the most helpful mother:censored:ers I've ever had the privilege to encounter. I'm gonna try this out tomorrow an see what happens. Thanks guys!
-
how did Mother:censored:ers get past the word filter is what I want to know. Thanks SMF!!
-
it didnt matt... the FBomb is :censored: lol