Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PS4 => PS4 Controllers/PS4 Rapid Fire Controllers => Topic started by: JRN00498 on January 12, 2015, 06:14:20 PM

Title: Pictures of the JDM-011 PS4 Controller/ Trying to X O mod
Post by: JRN00498 on January 12, 2015, 06:14:20 PM

Hey guys, and gals,
  I have been looking long and far for a way to hack the newer circuit board designs, in order to simply remap my X and O buttons to the back. I thought, going into this project, it would be as simple as the XBOX360, and XBOX ONE mods. I was extremely wrong.

  So, without further ado, I will just ask if anyone knows, based on these pictures, where I would need to solder for a ground, as well as for the X and O buttons. Feel free to download the picture if you want to go into Paint, and paint the traces. I have done that, but it looks like crap and I do not want to upload it because it is too embarrassing.

 

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fs12.postimg.org%2Fblhhu1ovt%2F0111152252.jpg&hash=b92ee315d693fde8906c5f90dce90f8599b151d5) (http://postimg.org/image/blhhu1ovt/)


(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fs14.postimg.org%2Fecpf9cerx%2FIMG_0796.jpg&hash=b09db725dd4a9d0ddfcab7cecbb745cafc71c12a) (http://postimg.org/image/ecpf9cerx/)

Title: Re: Pictures of the JDM-011 PS4 Controller/ Trying to X O mod
Post by: RDC on January 12, 2015, 11:11:03 PM

Based on those pics? no, and welcome to how Sony does things.

You can't solder to the flex board there unless you want to ruin it, in which case have at it. ;)

https://www.acidmods.com/forum/index.php/topic,43542.msg324803.html#msg324803 (https://www.acidmods.com/forum/index.php/topic,43542.msg324803.html#msg324803)

Title: Re: Pictures of the JDM-011 PS4 Controller/ Trying to X O mod
Post by: JRN00498 on February 02, 2015, 11:05:29 AM

Thanks, RDC. I figured it was probably a long shot, so I just ordered one of those chips from modcentralusa. Supposed to be shipped today, and hopefully all goes well. Matt told me it was damn near impossible, but I had to tinker anyhow. Thank God, I didn't solder anything.
Quick question: would better pics help out at all? Those were half @ssed. I can't scan like You do, but I can get better pics if they help?

Do you happen to know if there are any 3rd party PS4 controllers on the market that are moddable? At $15.00, I think I got a great deal on the chip I bought, I just wish there were some generic off the shelf controllers I could hack up in a 20 minutes and have a "tournament style" controller.