Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PS4 => PS4 Controllers/PS4 Rapid Fire Controllers => Topic started by: Munkee915 on April 29, 2017, 09:03:06 PM
-
I am trying to install a remap chip on my DS4 w/ JDM-001. The install videos show a solder point for the LED connection, but from from what i understand this solder point is not available on my board. What exactly is this point on other controllers? Is there another point on the board or connector I can go to that will do the same thing? I have a pin out for the connector on my board but since I dont know what point that is exactly on newer boards I'm not sure which pin to look for. Thanks.