Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Go => Topic started by: SourOneTonSoup on June 14, 2017, 04:13:02 PM
-
Hey guys I trying to basically take out the bottom slide out a psp go, and convert it to a USB to attach it to my phone. Maybe 3d printing slimmer case but keep the front faceplate. Here's some 3d models I mocked up
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi.imgur.com%2FjT1h42i.png&hash=711090686331d878b86e79c6a6ddb0d40d938ffa)
I found the thread for the PSP pinout project using a MCP4251 digital potentiometer to the joystick and and a ATmega168 micro controller for the rest of the controls. The goal there was to get a PS1 controller working on the psp
Main problem is the pin out connector on the PSP before the GO are easy and look like this.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Flh6.ggpht.com%2F_GrYrzHoz79c%2FSsqDRQRSmgI%2FAAAAAAAAAOs%2FYR011hvOFLU%2Fmobozif3.jpg&hash=3db0dc4d6a16dba60271950e6b4681cbde32eac3)
And on the Go it doesn't seem so simple and i cant find a pinout yet
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww.honsoncn.com%2Fpic%2F201503%2FIMG_2376.JPG&hash=b02c84a74d52894a1d6647ac1b19c8b3411280b3)
Anyway guys this is my first true DIY electronics but pretty tech savvy and think can manage flashing the chips and soldering and what not on a bread board.
My main question is, can it end up being small 2 chip solution +1 for USB? Or will it start getting to crowed for what i want to do?
Any tips on chips I should use or links to pages that have the program scripts to flash like what i'm going for? Or the PSP Go Control Pinout
https://www.acidmods.com/forum/index.php?topic=17761.0 (https://www.acidmods.com/forum/index.php?topic=17761.0) Best Resource I found on the subject I've come across