Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: songoku78 on August 16, 2017, 11:38:29 PM
-
Hi @ all,
as in subject, my start button is not working.
opened controller already and cleaned with cleaning alcohol (99,8 %).
after cleaning and reassembling the button works for some minutes. after that it just stops working again.
so there seems to be a problem with solder points or traces anywhere ?
and sorry i got no decent camera to make high res pictures which could be of use.
i looked in this post : https://www.acidmods.com/forum/index.php/topic,34543.0.html (https://www.acidmods.com/forum/index.php/topic,34543.0.html)
but i really do not know how to test traces.
Any help would be very appreciated. many thanks in advance
-
post up some pictures of the board and the rubber pad that contacts the pcb board. Itll give us a better picture of what you are dealing with.
-
i think the rubber pads were ok. i used this guide to repair it already: http://staticint.blogspot.de/2013/02/xbox-360-wireless-controller-start.html (http://staticint.blogspot.de/2013/02/xbox-360-wireless-controller-start.html)
thanks nonetheless. but i will not open it up again, soldering was hard enough :D
-
Glad you got it working, now game on!!!