Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => Xbox One => Xbox One controllers/Xbox One Rapid fire Controllers => Topic started by: Lazarus65 on April 18, 2018, 06:07:16 PM

Title: Arbiter 4 Rapid Fire 1697/1698 board
Post by: Lazarus65 on April 18, 2018, 06:07:16 PM
Since I couldn't find anything about this any other place, I thought I post here. These are the solder points for the Arbiter 4.0 Rapid Fire chip. The front pins are the same as the 1537. Will be trying to find a way to add to a 1708 controller later on.


(https://s7.postimg.cc/68thqekjr/1697-_Front_PCB.jpg) (https://postimg.cc/image/68thqekjr/)

(https://s7.postimg.cc/xw674idg7/1697-rear_PCB.jpg) (https://postimg.cc/image/xw674idg7/)
Title: Re: Arbiter 4 Rapid Fire 1697/1698 board
Post by: Ironmanhiggs on October 23, 2019, 03:13:03 PM
Any chance anyone has this same pic without the red print showing what wires are. I can't clearly see the point on sig and led to know which side to go to
Title: Re: Arbiter 4 Rapid Fire 1697/1698 board
Post by: Lazarus65 on October 30, 2019, 12:29:04 AM
(https://i.postimg.cc/y37XVybk/Screenshot-2019-10-30-Microsoft-Word-XBox-One-Install-V2-0-F.png) (https://postimg.cc/y37XVybk)

(https://i.postimg.cc/XXgkstrF/Screenshot-2019-10-30-Microsoft-Word-XBox-One-Install-V2-0-F.png) (https://postimg.cc/XXgkstrF)

Sorry, the original tutorial shows these points more clearly.
SimplePortal 2.3.5 © 2008-2012, SimplePortal