Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PS4 => Topic started by: Yasso on March 23, 2019, 03:54:28 AM
-
hello friends I have a problem with L3 (Board 055), I have exchanged because the character in the game could not run, now I have the problem that the character in the game moves slowly without me touching L3. have dived several times L3 but the problem remained.
I think the problem lies with the board / pins of L3. can someone help me, what option do I have? and thanks google for my english :huh:
(https://i.postimg.cc/fVhdhDy8/IMG-5824-23-03-19-12-32.jpg) (https://postimg.cc/fVhdhDy8)
(https://i.postimg.cc/TyXnnssH/IMG-5826-23-03-19-01-33.jpg) (https://postimg.cc/TyXnnssH)
(https://i.postimg.cc/fS0b2zt7/IMG-5827-23-03-19-01-33.jpg) (https://postimg.cc/fS0b2zt7)
(https://i.postimg.cc/zLvQWVRf/Full-Size-Render-23-03-19-01-55.jpg) (https://postimg.cc/zLvQWVRf)
the figure moves in the right direction from left to right
-
You replaced the left stick now you have to replace the right
-
Hi, thank you for your answer ... you mostly R3. so if I change L3 and it has a mistake I have to change R3 as well
-
Have now exchanged R3 synonymous but unfortunately the problem is still there :nono:
there a way to recalibrate the sticks? Windows program I know that does not work in PS.4 mode
Greetings from Germany
-
Where did you get the replacement stick from?
What is the voltage of the middle pin of the X-axis? It should be right around 1.6v on all of them with the sticks at the center position, not touched.
-
hi thank you for your answer, have the sticks from defective boards removed.
and who is more than 1.6V, what is it?
nice greetings
-
Use a DMM, Digital Multi-Meter, and measure the voltage on each Stick from Ground to the X and then the Y Axis. Do not move the Stick, the voltage should measure around 1.6v each.
(https://www.acidmods.com/RDC/DS4/Misc/IMG-5827-23-03-19-01-33_edit.jpg)
-
Hi I measured and got X-axis and this value
(https://i.postimg.cc/8fg1sJ9V/Full-Size-Render-30-03-19-09-02.jpg) (https://postimg.cc/8fg1sJ9V)
and at Y-axis this one
(https://i.postimg.cc/9DsXsnbM/Full-Size-Render-30-03-19-09-02-1.jpg) (https://postimg.cc/9DsXsnbM)
what can I do now
thank you for your help
-
You need to set the meter to DC, 1 more click to the right V-, you have it on AC there V~.
-
OK a second try, I have the voltage of L3 / R3 x-axis and y-axis
(https://i.postimg.cc/rKTTLDD2/L3-X.jpg) (https://postimg.cc/rKTTLDD2)
(https://i.postimg.cc/k2tL696v/L3-Y.jpg) (https://postimg.cc/k2tL696v)
(https://i.postimg.cc/r0qHPrhf/R3-X.jpg) (https://postimg.cc/r0qHPrhf)
(https://i.postimg.cc/PN37SN1M/R3-Y.jpg) (https://postimg.cc/PN37SN1M)
I'm happy who I solved the problem, I'm grateful for every tip that helps me