Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PS4 => PS4 Controllers/PS4 Rapid Fire Controllers => Topic started by: RTOTOSAUS on May 27, 2019, 04:09:42 PM
-
HELLO GUYS!!!
I GOT 2 PS4 CONTROLLERS PCB´S... JDM-020 & JDM-030... I LOST SOME PIECES :faint: :faint: AND DO NOT KNOW THE VALUES... :dntknw: :dntknw: :dntknw: SO I NEED SOME HELP!!! :beg: :beg: :beg: THANKS!!! :victory: :victory: :victory:
(https://i.postimg.cc/XB3vFGTC/NEED-VALUES-1.png) (https://postimg.cc/XB3vFGTC)
(https://i.postimg.cc/34ZktFjB/NEED-VALUES-2.png) (https://postimg.cc/34ZktFjB)
(https://i.postimg.cc/HcmJ0hMn/NEED-VALUES-3.png) (https://postimg.cc/HcmJ0hMn)
-
On that JDM-020, the smallest circled component is a Resistor that is 100k, 0402 size. It's the only critical one. The other 2 are just decoupling Capacitors and you could put anything from 1uF to 10uF in there or just leave them unpopulated.
On the JDM-030, Top side of the board, the component at the bottom is also a 100k, 0402 sized Resistor and needs to be installed. The other one is just a decoupling Capacitor, 0.1uF to 1uF would do and it is not critical. Bottom side of the JDM-030 board is also just a decoupling Capacitor and same applies to it.
-
THANKS!!! :hifive: :hifive: :hifive:
THANKS A LOT... THE LAST ONE... AT THIS TIME... ON THE JDM-020 PCB... RIGHT TOP ON THE BATTERY PLUG... THERE ARE 3 ZENER DIODES... ONE OF THEM IS DEAD... NO VALUE ON MULTIMETER...THERE IS A EQUIVALENT?? & THERE ARE SOME RESISTOR ABOVE THE FFC... I LOST ONE OF THEM... SO I NEED THE VALUE TO... THANKS A LOT...
(https://i.postimg.cc/0z4R01GT/NEED-VALUES-4.png) (https://postimg.cc/0z4R01GT)
-
Resistor is 68ohm, 0402 size.
Diode marking is 41. Package is a DO219AB(SMF) Hard to know exactly what it is since nothing is crossing to that marking. It just seems like some type of Schottky Diode, something like the V2F6HM3/H would probably work fine in there.
-
OK DUDE... THANKS!! :hifive: :hifive: :hifive:
I WAS WITH THE DOUBT ABOUT THE DIODE BETWEN ZENER OR SCHOTKY... THANKS A LOT. :victory: :victory: :victory:
-
If it was a Zener I'd have let you know the approximate voltage since I pulled one off the board to test it. ;) It only has a forward voltage of around 0.35v though, and is there in the power supply with a couple others just like it, so switching diode comes to mind as it would be kind of weird if it were a group of Zener diodes.
-
OK DUDE!!... THANKS A LOT!!! :hifive: :hifive: :hifive:
I FORGOT... OVER THE FFC.. THERE ARE TREE RESISTORS... I LOST IT ONE OF THEM TO... THE LEFT ONE... COULD YOU PLEASE TELL ME THE VALUE??... I AM A BEGINEER... SO THAT WAS THE CONFUSION ABOUT THE DIODES... THANKS!!! :victory: :victory: :victory:
-
Already told you the Resistor value, and you can turn off Caps Lock.
-
OK DUDE!!! I WAS LOOKING FOR THE DIODE DATASHEET... SO I DIDN´T SEE THE RESISTOR VALUE 68 OHM... GOT IT... MY MISTAKE...SORRY, REALLY SORRY... YOU GAVE ME ALL THE VALUES I NEED.. THANK YOU SO MUCH FOR YOUR TIME... SEE YA!! :victory: :victory: :victory: