Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => Xbox One => Xbox One controllers/Xbox One Rapid fire Controllers => Topic started by: spitaleet on January 23, 2020, 03:39:06 PM

Title: xbox one controller 1537only work plugged
Post by: spitaleet on January 23, 2020, 03:39:06 PM

Good evening.
I have this joystick on the bench with the following situation:
It works normally on cable, however, when connecting by battery, the led just flashes without synchronization, and when pressing the synchronize button, nothing happens (no lights).

I did the basic tests:
*no short on the primary regulators.
* I replaced the Q9.
*nothing heats up.
*sync button works fine on test.

Any tips?

Title: Re: xbox one controller 1537only work plugged
Post by: spitaleet on January 24, 2020, 07:48:30 AM

Solved!
The routed of TP6 point is open, jumper it and... work  :tup:

Title: Re: xbox one controller 1537only work plugged
Post by: oasanshes on February 14, 2020, 07:20:39 AM

I have the same problem, how did you jumper it? Thanks

Title: Re: xbox one controller 1537only work plugged
Post by: RDC on February 14, 2020, 05:25:24 PM

TP6 is on the MCU board and part of the wirless circuit, no idea how that could have caused that issue.

Check and make sure L1 is on the button/power board, it can get knocked off. Also look for any cracks in the PCB.