Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: zis2104 on February 07, 2020, 03:06:58 PM

Title: xbox 360 wireless controller sensor analogue trace broken....
Post by: zis2104 on February 07, 2020, 03:06:58 PM: I tried to replace sensor analog of xbox 360 controller wireless and i have broken...how i could fix?
(https://i.postimg.cc/Mv7zvthv/IMG-20200207-221452.jpg) (https://postimg.cc/Mv7zvthv)

(https://i.postimg.cc/Vr081Fqs/IMG-20200208-000215.jpg) (https://postimg.cc/Vr081Fqs)
Title: Re: xbox 360 wireless controller sensor analogue trace broken....
Post by: RDC on February 11, 2020, 01:19:26 PM: You will have to solder to a couple of vias to repair that damage now.

https://www.acidmods.com/forum/index.php/topic,34545.0.html (https://www.acidmods.com/forum/index.php/topic,34545.0.html)
Title: Re: xbox 360 wireless controller sensor analogue trace broken....
Post by: zis2104 on February 13, 2020, 03:55:35 AM: https://www.acidmods.com/RDC/360/Wireless_Matrix_Bottom.jpg (https://www.acidmods.com/RDC/360/Wireless_Matrix_Bottom.jpg)

wait, i need solder only 4 four trace for the sensor? and the other pin?
Title: Re: xbox 360 wireless controller sensor analogue trace broken....
Post by: RDC on February 13, 2020, 11:57:48 AM: You need those 4, and also make sure the AN+ and Ground for each POT is also connected. The Grounds of them look alright in those pics, but the AN+ need connected, and they can go to TP7 on the board.
Title: Re: xbox 360 wireless controller sensor analogue trace broken....
Post by: zis2104 on February 13, 2020, 02:13:00 PM: Ehm sorry this is my first time, AN+ where is? and how i conneted to pot? you can show me with a pics?
Title: Re: xbox 360 wireless controller sensor analogue trace broken....
Post by: RDC on February 13, 2020, 02:41:26 PM: The other torn up pin you asked about, run that to TP7.
Title: Re: xbox 360 wireless controller sensor analogue trace broken....
Post by: zis2104 on February 13, 2020, 04:23:46 PM: Than all rest of torn, i have connect them to tp7. Sorry forbad english, i am italian.
Title: Re: xbox 360 wireless controller sensor analogue trace broken....
Post by: zis2104 on February 13, 2020, 04:44:34 PM: (https://i.postimg.cc/QFDRdftS/IMG-20200214-014202.jpg) (https://postimg.cc/QFDRdftS)
Title: Re: xbox 360 wireless controller sensor analogue trace broken....
Post by: RDC on February 13, 2020, 04:47:16 PM: Just connect the 2 at the stick on the right to TP7. Leave the other 2 for the stick button alone, you don't need all 4 of those connected, only the 2 in the earlier pic.
Title: Re: xbox 360 wireless controller sensor analogue trace broken....
Post by: zis2104 on February 13, 2020, 04:59:52 PM: (https://i.postimg.cc/34wZSvwg/IMG-20200214-015835.jpg) (https://postimg.cc/34wZSvwg)
Title: Re: xbox 360 wireless controller sensor analogue trace broken....
Post by: RDC on February 13, 2020, 05:04:08 PM: Large line yes, connect those 2 to TP7.

I have no idea what the other 2 lines there are supposed to be.
Title: Re: xbox 360 wireless controller sensor analogue trace broken....
Post by: zis2104 on February 13, 2020, 05:12:03 PM: Another lineas are error, and tp7 are the circle in yellow right? Sorry it's first time for me, don't kill me.
Title: Re: xbox 360 wireless controller sensor analogue trace broken....
Post by: RDC on February 13, 2020, 05:15:45 PM: TP7 is that 'yellow circle' yes, you can solder to that, it is gold plating that is on the copper trace there.