Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => Xbox One => Xbox One controllers/Xbox One Rapid fire Controllers => Topic started by: spitaleet on March 14, 2020, 10:52:23 AM
-
Hello there!
Today iam working on a 1697 pcb with the follow problem: all buttons works perfectly, but, if a press the "center button! (big X ) its remain pressed forever.
I am testing with only the boards off, jumper with a tweezers.
The button have 2.2v and gnd in the respectives pads, remain the same after press...
I see the problem in this test site (https://html5gamepad.com) , B16 remain 1.0 afer a press!
I replace the MCU BOARD and same problem happens.
I replace Q8,Q3, checked D27, R27 and R24.
I see a little oxidation in the U4 (thats scary me), on C45 side.
Any tips?!
-
Q3 only turns the LED on/off.
There is no U4 or C45 on the Button/Power board of the 1697 or 1698, you must have a 1708?
That HTML5 Tester doesn't even register my Guide button press, but it shows it's working on a Cronus Pro, so I'd wonder if it's the tester hat has the issue. Try it on something else and see how it acts.
-
Q3 only turns the LED on/off.
There is no U4 or C45 on the Button/Power board of the 1697 or 1698, you must have a 1708?
That HTML5 Tester doesn't even register my Guide button press, but it shows it's working on a Cronus Pro, so I'd wonder if it's the tester hat has the issue. Try it on something else and see how it acts.
You hit!
*Yes, my bad, model 1708.
*I dont know why but HTML5 bug with this controller ( i try another and dont have the same issue).
*The problem related is: only analogs works, and when a put in HTML5 deduce the guide button always pressed is the problem, after all, i plug the controller in the xbox one and work perfectly... (probably the initial problem is a temporally bug? or sync problem? never know)
But, you arrange the mess in my head!
Very ty man.