Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PS4 => PS4 Controllers/PS4 Rapid Fire Controllers => Topic started by: l3ml2000 on June 09, 2020, 08:43:20 AM

Title: JDM-050 (1-982-355-21): not charge the battery JDM-040 (1-981-330-21): No sound
Post by: l3ml2000 on June 09, 2020, 08:43:20 AM

Hello, I saw that on the page they helped several people fix their controls, I hope you can help me.
In my controls I changed the L3 button and they were fine, but in the process several components were lost.
Summary:
JDM-050 (1-982-355-21): does not charge the battery, when I connect the usb cable the light turns on and off, but when I remove the cable I press the PS button the control turns off. The battery was tested in another control and it works. Attached image of the area that I think may be the problem.
JDM-040 (1-981-330-21): No sound from headphones. Attached image of the area that I think may be the problem.
I also attach full images of the plate in case they see that some other component is missing.
Can you tell me what components I am missing? model and values?
I hope you can help me.
From already thank you very much
Best regards


(https://i.postimg.cc/RWZVycsx/JDM-040-1-981-330-21.jpg) (https://postimg.cc/RWZVycsx)

(https://i.postimg.cc/hfbfH4KT/JDM-040-1-981-330-21-1.jpg) (https://postimg.cc/hfbfH4KT)

(https://i.postimg.cc/B8y6xXC9/JDM-040-1-981-330-21-2.jpg) (https://postimg.cc/B8y6xXC9)

(https://i.postimg.cc/ppxdYNKT/JDM-040-1-981-330-21-3.jpg) (https://postimg.cc/ppxdYNKT)

(https://i.postimg.cc/w14Tp7Zy/JDM-050-1-982-355-21.jpg) (https://postimg.cc/w14Tp7Zy)

(https://i.postimg.cc/23n6ZjbM/JDM-050-1-982-355-21-1.jpg) (https://postimg.cc/23n6ZjbM)

(https://i.postimg.cc/FkbH5GXN/JDM-050-1-982-355-21-2.jpg) (https://postimg.cc/FkbH5GXN)

(https://i.postimg.cc/RNRZgPTT/JDM-050-1-982-355-21-3.jpg) (https://postimg.cc/RNRZgPTT)

Title: Re: JDM-050 (1-982-355-21): not charge the battery JDM-040 (1-981-330-21): No sound
Post by: l3ml2000 on June 09, 2020, 09:22:00 AM

I found another missing component


Thank you

(https://i.postimg.cc/PL5mK38G/JDM-040-1-981-330-21-4.jpg) (https://postimg.cc/PL5mK38G)

Title: Re: JDM-050 (1-982-355-21): not charge the battery JDM-040 (1-981-330-21): No sound
Post by: RDC on June 09, 2020, 11:45:17 AM

The missing component on the JDM-050 is a 150k, 0402 size Resistor. It should be replaced with one that has a 1% or better tolerance.

The broken component on the JDM-050 may or may not be causing an issue. It's mostly epoxy as the actual Transistor that is in there is very small. It controls the Heavy Rumble motor, so if that works when/if you get it fixed then you can leave it as is.


The 2 missing components on the JDM-040 are 100k, 0201 size Resistors.

The last missing component on the JDM-040 is just a Capacitor, it will not cause any issues and can be left like that.

Title: Re: JDM-050 (1-982-355-21): not charge the battery JDM-040 (1-981-330-21): No sound
Post by: l3ml2000 on June 15, 2020, 12:23:20 PM

Thanks RDC for the quick response !! Do you think that those missing resistances are part of the problems I mentioned?

Title: Re: JDM-050 (1-982-355-21): not charge the battery JDM-040 (1-981-330-21): No sound
Post by: RDC on June 15, 2020, 01:46:33 PM

The -050 for sure, as the one missing Resistor there is half of a voltage divider that the MCU uses to read the battery voltage.

The -040, most likely, but I haven't traced that one out to know exactly what those Resistors are doing, though wiht them all being 100k they are most likely Pull-Up or Pull-Does on some data or control lines and if they go missing all kinds of weird issue can happen.

Title: Re: JDM-050 (1-982-355-21): not charge the battery JDM-040 (1-981-330-21): No sound
Post by: l3ml2000 on June 17, 2020, 04:48:41 PM

Thank you, I am trying to find a business that sells them (it is difficult in Argentina).
100K I got from other circuits, they are bigger but I can adapt the tracks to be able to solder them.
I can't get the 150K resistor, can you put a common one? like in the picture.
Then I will comment if the problem was solved.
Best regards
(https://i.postimg.cc/XB0JNXzS/Untitled.png) (https://postimg.cc/XB0JNXzS)

Title: Re: JDM-050 (1-982-355-21): not charge the battery JDM-040 (1-981-330-21): No sound
Post by: RDC on June 18, 2020, 03:10:40 PM

If you change the value of the missing one on the -050 board then you also need to change the value of the one that is still on the board there. They both need to be the same value.

Title: Re: JDM-050 (1-982-355-21): not charge the battery JDM-040 (1-981-330-21): No sound
Post by: l3ml2000 on June 19, 2020, 04:45:35 PM

does not understand me, I just want to change the package, I will respect the value and the percentage.
I just hope I can solder those kinds of resistors

Title: Re: JDM-050 (1-982-355-21): not charge the battery JDM-040 (1-981-330-21): No sound
Post by: RDC on June 19, 2020, 06:45:38 PM

You can use any package you want, as long as the value is 150k and 1% or better tolerance for the -050 board.

Title: Re: JDM-050 (1-982-355-21): not charge the battery JDM-040 (1-981-330-21): No sound
Post by: ZhenyaKa on October 15, 2020, 03:55:23 AM

I add here my question. Think no need to create new topic.
Problem is similar, but components I think at places :)

JDM-050, no reaction to PS button. No battery consumption (wait about 30 secs and voltage was still the same - 3 digits after point)

When connect USB cable PC detects it and all buttons (sticks, triggers) works fine, but battery voltage doesn't changes and usb current is zero (via cheap usb tester).

Where to dig?

PCB looks like new. No traces of soldering

Title: Re: JDM-050 (1-982-355-21): not charge the battery JDM-040 (1-981-330-21): No sound
Post by: RDC on October 15, 2020, 04:59:12 AM

If nothing is missing then the PMIC chip is probably messed up. The larger chip on the top side of the board.

Title: Re: JDM-050 (1-982-355-21): not charge the battery JDM-040 (1-981-330-21): No sound
Post by: wickated on October 15, 2020, 08:27:04 AM

check battery voltage, charge it via tp4056 and recheck everything

Title: Re: JDM-050 (1-982-355-21): not charge the battery JDM-040 (1-981-330-21): No sound
Post by: ZhenyaKa on October 15, 2020, 09:07:26 PM

Quote from: RDC on October 15, 2020, 04:59:12 AM

If nothing is missing then the PMIC chip is probably messed up. The larger chip on the top side of the board.

I forget to say. No any led blinking when cable connected

This chip probably dead? 7736FTG 7204G1.

It's not cheap :(