Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: konnorrigby on August 01, 2012, 05:32:28 PM
-
OK so I'm working on a controller. I got the idea from phantom over at xboxscene. Its almost complete but here's my issue:
Ive got a couppe batteries internalized but they put out 3.7v and the controller needs about 3.3 right? Should I use a ohm resistor? Or is there a better way? Thanks:)