Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => Xbox One => Xbox One controllers/Xbox One Rapid fire Controllers => Topic started by: Adampark on August 20, 2020, 11:04:40 AM

Title: Xbox elite series 1 board problem
Post by: Adampark on August 20, 2020, 11:04:40 AM

Hi all, I have replaced a Thumbstick module on elite series 1 board after removing the damaged modular I noticed c27 was corroded so I tried the clean it up and nocked it off the board I cannot replace it with one from a donor board as the pads have lifted too , now The right stick click button is now constantly pressed is there anyway too repair this?

Any help will be appreciated.
Adam

Title: Re: Xbox elite series 1 board problem
Post by: RDC on August 20, 2020, 02:54:07 PM

C27 missing wouldn't cause that issue, something there is either shorted or corroded on the RSC line to ground.

Title: Re: Xbox elite series 1 board problem
Post by: Adampark on August 27, 2020, 05:04:19 AM

Thanks buddy your a genius. Cleaned it all up and now works as it should thanks for your help RDC appreciated.

Kind regards