Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PS4 => PS4 Controllers/PS4 Rapid Fire Controllers => Topic started by: XaRaBaS on December 04, 2020, 02:35:00 AM
-
Hi guys i've a little problem to recognize the name of those components and where i can find those.. I have them circled in red, the motherboard is JDM-011
Thanks in advance
(https://i.postimg.cc/N59f1gfg/20201204-112625.jpg) (https://postimg.cc/N59f1gfg)(https://i.postimg.cc/BXrZpdX2/20201204-112650.jpg) (https://postimg.cc/BXrZpdX2)(https://i.postimg.cc/SncSvDM3/20201204-112704.jpg) (https://postimg.cc/SncSvDM3)
-
1 i gues is not interchangeable
2 is npn mosfet
-
ty for reply..
1. do u know the name?
2.and do u know how type i can change it? SOT-23 how volt how amp?
-
Connector is an FFC/FPC, 12 pin, Vertical, 0.5mm pitch. A suitable replacement - https://www.digikey.com/en/products/detail/kyocera-international-inc-electronic-components/046244412010846/10313181
-
Thanks and the mosfet burned do u know what type i can buy?
-
Any P-Channel FET in the SOT-23F package rated for a few Amps or more should be fine. The SSM3J328R or anything similar for example.
-
oops, rechecked. it was pfet. thanks RDC! :drunk:
-
Hi.
I am new here.
Can someone help mi with it ?
Thank you.
(https://i.postimg.cc/06c9Lm4H/jdm-011.jpg) (https://postimg.cc/06c9Lm4H)
-
u can just wire it. not the solution but will work
-
It's the switching Inductor for the 7710 there that does the battery charging. It should be replaced with another one of the same value or at the least one that is close enough, it's ~2.2uH in value and 1008 size.