Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => Xbox One => Xbox One controllers/Xbox One Rapid fire Controllers => Topic started by: dragon2812 on December 28, 2020, 06:31:44 AM

Title: Ripped 1708 Joystick Solder Pad
Post by: dragon2812 on December 28, 2020, 06:31:44 AM: Hey guys,

I tried to replace the left joystick on my 1708 controller but I accidentially ripped off the middle one of the solder pads for the y-Axis potentiometer.

Someone mentioned this problem in a reddit post and he shared a link with a few pictures on imgur so I will include this link for you:

https://imgur.com/a/Z4MAiMU (https://imgur.com/a/Z4MAiMU)

This is exactly how my solder point looks. Only this pad is missing and I checked the schematics on https://www.acidmods.com/forum/index.php?topic=43981.0 (https://www.acidmods.com/forum/index.php?topic=43981.0) , but I don't know where I can solder a jumper wire to.

I hope some of you may have an idea how to fix this...

Thanks!
Title: Re: Ripped 1708 Joystick Solder Pad
Post by: RDC on December 28, 2020, 11:44:14 AM: Solder a jumper wire from the lead there to TP63.
Title: Re: Ripped 1708 Joystick Solder Pad
Post by: dragon2812 on December 28, 2020, 12:59:47 PM: Okay thank you very much! I will try that out!
Title: Re: Ripped 1708 Joystick Solder Pad
Post by: Sperotto on December 29, 2020, 10:56:54 AM: Hi! I have the same issue, but with those pads:

(https://i.postimg.cc/fkthm2Zb/YAsVKV4.jpg) (https://postimg.cc/fkthm2Zb)

Anyone can helpme?
Title: Re: Ripped 1708 Joystick Solder Pad
Post by: RDC on December 29, 2020, 11:22:47 AM: Jumper the left one to the bottom one of the 3 on the left. 4 to 3
Center one goes to TP64. 5 to TP64
Jumper the Right one to the Top one of the 3 on the left. 6 to 1

Code: [Select]
1 2 3 4 5 6
Title: Re: Ripped 1708 Joystick Solder Pad
Post by: Sperotto on December 29, 2020, 11:25:32 AM: Thank you!!! Save the day here!