Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => Xbox One => Xbox One controllers/Xbox One Rapid fire Controllers => Topic started by: Marcin_519 on January 26, 2021, 08:43:40 PM

Title: Joystick not working.
Post by: Marcin_519 on January 26, 2021, 08:43:40 PM: Hey guys. I?m missing D27 C25 and R57 on my 1698 board.RSX is not working is there any way of bypassing it ?
(https://i.postimg.cc/GBNXgh0S/3-A556-E98-26-FF-4-FDB-98-E8-7-D181-B849-EEE.jpg) (https://postimg.cc/GBNXgh0S)
Title: Re: Joystick not working.
Post by: RDC on January 27, 2021, 12:53:54 AM: If the traces and pads there are all still intact, replace R57 with a 1k, 0402 Resistor.

If the traces and pads are all boogered up, go to the bottom of the board and install a 1k 1/8w Resistor from the RSX pin to TP102.
Title: Re: Joystick not working.
Post by: Marcin_519 on January 27, 2021, 11:32:25 AM: Thank you i got it :). But now im facing weird issue. When I pull the trigger axis 2 and axis 3 move. The more I pull the trigger the more it moves any ideas ?
Just a slight move but numbers change when trigger is pressed
Title: Re: Joystick not working.
Post by: RDC on January 27, 2021, 12:52:58 PM: The more you pull the Trigger the more the Trigger should move, that question isn't really worded too goodly. I have no idea what you are using to test the controller there, so no idea what axis is supposed to be what.

Try putting C25 back in there, 100nF. If pads are missing install it on the back side of the board between the RSX pin and Ground.
Title: Re: Joystick not working.
Post by: Marcin_519 on January 27, 2021, 01:53:18 PM: IM sorry my English is not the best. I am using gamepad-tester.com when I pull right trigger It triggers right joystick as well
It also works like potentiometer more I pull the RT more the axis change
Also sometimes right joystick button presses by it self
Title: Re: Joystick not working.
Post by: RDC on January 27, 2021, 01:55:59 PM: Try updating that thing, as one axis shouldn't have any effect on any other one unless something is messed up inside the MCU.
Title: Re: Joystick not working.
Post by: Marcin_519 on January 27, 2021, 02:15:03 PM: Maybe it?s because I used very thin single
Wire cable to connect it ?
Title: Re: Joystick not working.
Post by: RDC on January 27, 2021, 02:22:56 PM: To connect what? How is anyone else supposed to know what you connected to what with wire there.
Title: Re: Joystick not working.
Post by: Marcin_519 on January 27, 2021, 02:40:52 PM: I connected the RSX pin to TP102 with resistor but the wire I used is very thin
Title: Re: Joystick not working.
Post by: RDC on January 27, 2021, 02:46:02 PM: Ticker wire there is not going to make any difference.