Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PS4 => PS4 Controllers/PS4 Rapid Fire Controllers => Topic started by: lysy112 on March 28, 2021, 04:03:35 AM

Title: JDM-055 After replacement analog- not correct
Post by: lysy112 on March 28, 2021, 04:03:35 AM: (https://i.postimg.cc/VrrKB8vJ/jdm-055.jpg) (https://postimg.cc/VrrKB8vJ)

Hello. I replaced the 2 analog sticks and it's better but still drifting.
Right worst obstructing left seems to work well in games.
I exchanged the right one for the next one and more or less the same.
It is after the dualshock 4 collapse.
Any tips?
Title: Re: JDM-055 After replacement analog- not correct
Post by: wickated on March 28, 2021, 08:52:34 AM: just calibrate them by hands
Title: Re: JDM-055 After replacement analog- not correct
Post by: lysy112 on March 28, 2021, 08:57:53 AM: Quote from: wickated on March 28, 2021, 08:52:34 AM
just calibrate them by hands

How to do it. Because I'm an amateur
Title: Re: JDM-055 After replacement analog- not correct
Post by: zis2104 on March 28, 2021, 11:00:25 AM: Quote from: lysy112 on March 28, 2021, 08:57:53 AM

How to do it. Because I'm an amateur

https://youtu.be/mgBBgqVd59w (https://youtu.be/mgBBgqVd59w)
From 4:22
Title: Re: JDM-055 After replacement analog- not correct
Post by: lysy112 on March 29, 2021, 05:16:45 AM: I tried like in this movie. I moved until it broke and replaced the next one and it also turns left. I've already given up
Title: Re: JDM-055 After replacement analog- not correct
Post by: wickated on March 29, 2021, 05:29:11 AM: Quote from: lysy112 on March 29, 2021, 05:16:45 AM
I tried like in this movie. I moved until it broke and replaced the next one and it also turns left. I've already given up
i see u r reparing them. so its a matter of ur skill, not anyones else.
Title: Re: JDM-055 After replacement analog- not correct
Post by: lysy112 on March 29, 2021, 05:44:59 AM: I'm just getting started and learning. My hobby
Title: Re: JDM-055 After replacement analog- not correct
Post by: lysy112 on March 29, 2021, 10:54:53 AM: I soldered the next one from a working controller and tried to calibrate manually and it broke again.
I soldered another new alps and it works fine.
I used one used and 3 new parts for repair
The problem with calibration in new parts is normal?
Title: Re: JDM-055 After replacement analog- not correct
Post by: wickated on March 29, 2021, 11:27:32 AM: Quote from: lysy112 on March 29, 2021, 10:54:53 AM
The problem with calibration in new parts is normal?
with any. here is factory 3d
(https://i.imgur.com/rALIRwJ.jpg)