Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => Xbox One => Xbox One controllers/Xbox One Rapid fire Controllers => Topic started by: FRichardson on June 20, 2021, 12:29:14 PM

Title: 1708 - Solder pad ripped off on right stick
Post by: FRichardson on June 20, 2021, 12:29:14 PM

Does anyone know where this solder joint should connect with a jumper wire? The solder pad lifted up when I removed the right joystick. Below is the links to the image.

https://i.postimg.cc/8PV7WJGv/image0.jpg

Title: Re: 1708 - Solder pad ripped off on right stick
Post by: RDC on June 20, 2021, 01:35:35 PM

That is just a solder lug for holding the stick onto the board, it's ground, but it's purely a mechanical connection. That one missing will not really hurt anything.

Title: Re: 1708 - Solder pad ripped off on right stick
Post by: FRichardson on June 21, 2021, 06:53:59 AM

Sounds good. I will solder a new joystick and hopefully it works.

Title: Re: 1708 - Solder pad ripped off on right stick
Post by: FRichardson on June 21, 2021, 12:29:40 PM

On the gamepad tester it is showing that the right stick is still moving even though I have not solder a new joystick. Is there a capacitor or resistor that I need to check around the right stick?

Title: Re: 1708 - Solder pad ripped off on right stick
Post by: RDC on June 21, 2021, 12:36:28 PM

If there is no stick installed then the lines are floating and they will do all sort of weirdo things.

Title: Re: 1708 - Solder pad ripped off on right stick
Post by: FRichardson on June 21, 2021, 12:41:13 PM

Is that normal to do that if there is no stick or is there something else going on?

Title: Re: 1708 - Solder pad ripped off on right stick
Post by: FRichardson on June 21, 2021, 07:53:54 PM

I installed a new right joystick and everything seems to be working fine. I appreciate the help RDC.  :#1: :victory: :tup:

Title: Re: 1708 - Solder pad ripped off on right stick
Post by: RDC on June 21, 2021, 10:08:36 PM

Welcome.