Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PS4 => PS4 Controllers/PS4 Rapid Fire Controllers => Topic started by: Eren_Ackerman on September 06, 2021, 03:18:10 PM

Title: Please, help! JDM-030 burned out component :(
Post by: Eren_Ackerman on September 06, 2021, 03:18:10 PM

Hello! Thank you, again, for the help the previous time. It helped me a lot <3

This time, a few minutes ago, I was trying to fix a JDM-030 when I got distracted and the flex cable going to the usb port slid a little sideways and the flex shorted. This chip next to the flex connector burned out and I don't know what it is  :confused: Please, help me? What is the chip marked in this picture? Thanks in advance <3

(https://i.imgur.com/eJ8eiv1.jpg)

Title: Re: Please, help! JDM-030 burned out component :(
Post by: dj_amir on September 17, 2021, 01:57:03 PM

Hi
This is a diode(d6f). Remove it from the board...try again ds4.

Title: Re: Please, help! JDM-030 burned out component :(
Post by: Eren_Ackerman on October 12, 2021, 08:59:54 PM

Thank you, dj_amir  :victory:

Title: Re: Please, help! JDM-030 burned out component :(
Post by: Eren_Ackerman on October 18, 2021, 01:30:39 PM

Update on this case:

I bought a soldering station Baku 702b now that I'm trying to learn this for serious. I removed the burned out d6f diode, and then instead of leaving it without it I decided to replace it with another one that I found in a faulty usb board from another jdm-030. Today I was able to test it because I bought yet another jdm-030 and tested this controller from this post and it's working just fine. Now I need to buy jds-030 replacement boards xd

Thanks again for the info <3