Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PS4 => PS4 Controllers/PS4 Rapid Fire Controllers => Topic started by: ScottishBakery on September 15, 2021, 06:53:26 AM
-
Hi, I'm trying to fix a PS5 DualSense for a friend. It was supposed to be a simple fix but I've had problem after problem ? kind of a long story but right now I just need to replace a few parts on the PCB that I accidentally ripped off with helping hands.
If you have a DualSense PCB on hand and don't mind measuring and identifying whatever SMCs go here, I'll be able to replace them. Unfortunately the controller is so new there isn't a schematic I can refer to yet. I would really appreciate anybody who can answer this question for me.
It's the top of the board next to the left analog stick module. Thanks in advance.
(https://i.imgur.com/qMrQCz6.png)
-
Larger one is a Resistor, 100k, it's a PullUp for the Reset line.
Smaller one is a Cap, also on the Reset line. The exact value isn't too critical, anything from 1nF to 100nF would be fine.