Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: anes08 on October 16, 2022, 09:59:39 AM
-
Hello,
Recently I bought a Xbox 360 slim and it came with 3 controllers , the owner said two of them were working but the 3 rd one has a thumbstick problem that it keeps going to the left . I opened the controller and found that most of the stick soldering pads are lifted , I read some posts about similar issues where people just use a jumper wires and solder them to specific points to fix the issue and so I did the same. I traced the pads and soldered them their respective points (https://imgur.com/qxttfM1).
(https://i.imgur.com/qxttfM1.jpg)
The image is my working controller, i don't have a picture of the broken one from the back
(https://i.imgur.com/6S6JcfK.jpg)
This is the controller with the issue, i'm pretty sure it's a Wireless CG
The stick now works in the Y direction ( i can go forward or backwards in games) but still goes to the right. How can I fix this issue ? , is it related to the soldering or the controller has reached it's end of life.
Thank you.