Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => Xbox One => Xbox One controllers/Xbox One Rapid fire Controllers => Topic started by: APintoZ on November 19, 2022, 01:14:53 PM
-
Hello,
I have a 1708 controller which doesn't power-up when the guide button is pressed. I checked and everything is fine with the button/power board, and when I replace the MCU board with another one it works fine. So, the problem is with the MCU board. Does any of you have a hint on where to start? Thank you!
AP
-
Inject 3.3v into that MCU board on the 3.3v rail and see what gets hot first. If it's a Cap, remove it, then try it with the top board again.
-
Thank you! I'll look at the schematics and find the 3.3v rail and try!