Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => Xbox One => Xbox One controllers/Xbox One Rapid fire Controllers => Topic started by: enigmaxg2 on January 28, 2023, 09:11:20 AM
-
Hi!
A controller came to my workshop to get the right stick drift fixed, replaced the stick (with it's two potentiometers) and still drifts to the left.
Analysing it on a computer, it doesn't go from -32768 to 32768, to make it to go to 0 (center) I need to move it fully to the right.
Further analysing it, I discovered that it doesn't have the right voltages at the center pin. It must be 0.8v but it has 0.3v, so I checked the board and while I didn't found any short or cut trace, I think a capacitor is the culprit, I swapped C23 and C25 and the problem also swapped from the X-axis to the Y-axis...
I don't have a multimeter with capacitance function, but knowing the part number/value will help me to get a replacement from any cellphone/other device board which I have the schematics for.
Thanks in advance
(https://i.ibb.co/r2nrt9Q/IMG-20230128-110720.jpg) (https://ibb.co/yFLjR2N)
-
Cap is a bit leaky and why it's acting like that. Value is 10nF, but anything from 1nF to 10nF would work fine there.
-
That did the trick! Thank you so much!
(https://i.ibb.co/FBKh2h5/IMG-20230130-131732.jpg) (https://ibb.co/MRsgrgc)
(https://i.ibb.co/S764r33/IMG-20230130-131127.jpg) (https://ibb.co/XkWr8CC)
-
Welcome.