Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => Xbox One => Xbox One controllers/Xbox One Rapid fire Controllers => Topic started by: fernas001 on February 21, 2023, 04:20:28 PM

Title: Has anyone tried using this kit made for a 1708 on a 1797?
Post by: fernas001 on February 21, 2023, 04:20:28 PM: Greetings! I would like to know if anyone has already tried to apply the 1708 extremerate (clicky) kit to a 1797 (elite series 2)

KIT info: https://extremerate.com/products/clicky-hair-trigger-kit-for-xbox-one-x-s-controller-lt-rt-shoulder-buttons-custom-flashshot-trigger-stop-flex-cable-for-xbox-one-x-s-controller-model-1708-x1md001?pr_prod_strat=copurchase&pr_rec_id=139139752&pr_rec_pid=7561139814650&pr_ref_pid=7561421127930&pr_seq=uniform (https://extremerate.com/products/clicky-hair-trigger-kit-for-xbox-one-x-s-controller-lt-rt-shoulder-buttons-custom-flashshot-trigger-stop-flex-cable-for-xbox-one-x-s-controller-model-1708-x1md001?pr_prod_strat=copurchase&pr_rec_id=139139752&pr_rec_pid=7561139814650&pr_ref_pid=7561421127930&pr_seq=uniform)

1708 MCU BOARD BOTTOM from https://acidmods.com/forum/index.php?topic=43981.0 (https://acidmods.com/forum/index.php?topic=43981.0)

(https://www.acidmods.com/RDC/XB1/1708%20BBB.jpg)

According To ExtremeRate the kit must use TP67 (RT) and TP68 (LT) and a pair of GND, in the 1708 model, So If I wanna apply this mod to 1797, I'm guessing that I need to use DB38 (LT) DB39 (RT) Am I correct? Does anyone have experience doing that? Or have you already tried?

1797 MCU/POWER BOARD TOP from https://acidmods.com/forum/index.php/topic,44547.0.html (https://acidmods.com/forum/index.php/topic,44547.0.html)

(https://www.acidmods.com/RDC/XB1/1797%20BBT.jpg)

**Thanks to RDC for the info
Title: Re: Has anyone tried using this kit made for a 1708 on a 1797?
Post by: RDC on February 21, 2023, 08:34:32 PM: Electrically they will work fine wired that way, as they are just Tact switches that are grounding out the LT/RT line when pressed. Far as mounting them goes, probably going to be some work there as those shells aren't much alike.
Title: Re: Has anyone tried using this kit made for a 1708 on a 1797?
Post by: fernas001 on February 21, 2023, 09:52:05 PM: Quote from: RDC on February 21, 2023, 08:34:32 PM
Electrically they will work fine wired that way, as they are just Tact switches that are grounding out the LT/RT line when pressed. Far as mounting them goes, probably going to be some work there as those shells aren't much alike.

Thanks you for you replay I?ll do it. And thanks for the information and photos about MCU boards
Title: Re: Has anyone tried using this kit made for a 1708 on a 1797?
Post by: fernas001 on February 21, 2023, 09:56:50 PM: If anyone have any comment or advice please let me know before breaking the control. Lol