Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PS4 => PS4 Controllers/PS4 Rapid Fire Controllers => Topic started by: tomari on October 06, 2023, 08:34:55 AM

Title: JDM-055 remote does not recognize the battery.
Post by: tomari on October 06, 2023, 08:34:55 AM

Hello.
I have a JDM-055 that does not recognize the battery, I have changed the battery with a new one and it does not recognize it either, if I connect the remote to the play it works perfectly, even if I remove the battery. What could this be due to? Could the charging IC be bad? Thank you.

Title: Re: JDM-055 remote does not recognize the battery.
Post by: RDC on October 07, 2023, 06:24:13 AM

Check that R59, R60 and C63 are in place and in spec.

https://acidmods.com/forum/index.php/topic,44645.0.html

Title: Re: JDM-055 remote does not recognize the battery.
Post by: tomari on October 07, 2023, 11:27:56 AM

Hi. I need value of R59 and 60. Thanks.

Title: Re: JDM-055 remote does not recognize the battery.
Post by: zis2104 on October 07, 2023, 04:06:17 PM

Are shorted?

Title: Re: JDM-055 remote does not recognize the battery.
Post by: zis2104 on October 07, 2023, 04:13:10 PM

150k 1% 60 and 59

Title: Re: JDM-055 remote does not recognize the battery.
Post by: tomari on October 08, 2023, 03:32:49 AM

I don't know if they are shorted or not, my problem is that the remote does not recognize the battery, the battery is at 100% and the remote says it is at 0. Sorry for my English, I am translating it with the Google translator.

Title: Re: JDM-055 remote does not recognize the battery.
Post by: zis2104 on October 08, 2023, 05:21:40 AM

Quote from: tomari on October 08, 2023, 03:32:49 AM

I don't know if they are shorted or not, my problem is that the remote does not recognize the battery, the battery is at 100% and the remote says it is at 0. Sorry for my English, I am translating it with the Google translator.

Me too, i am italian and my english is very bad

Title: Re: JDM-055 remote does not recognize the battery.
Post by: tomari on October 08, 2023, 02:01:46 PM

The inductor that is to the left of the pmic, when I measure it in continuity to ground, the multimeter gives me continuity, that means that there is a short, somewhere on the board, it could be that the pmic is defective and for that reason it does not detect me Battery. Thank you.