Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PS4 => PS4 Controllers/PS4 Rapid Fire Controllers => Topic started by: szczuru on January 20, 2024, 12:02:01 PM

Title: JDM-020 L3/R3 doesn't work after left analog replacement
Post by: szczuru on January 20, 2024, 12:02:01 PM

Hi, after replacing left analog L3 and R3 buttons stop working :( both analogs seems to works ok except those L3/R3. What could be wrong?

photos:
https://i.imgur.com/2fq3DCZ.jpg
https://i.imgur.com/x5aU7OT.jpg
https://i.imgur.com/nJdnHRP.jpg
https://i.imgur.com/Kik4Xlx.jpg

Title: Re: JDM-020 L3/R3 doesn't work after left analog replacement
Post by: zis2104 on January 21, 2024, 11:27:33 AM

Strange.....clean with ipa or try another analog and check trace

Title: Re: JDM-020 L3/R3 doesn't work after left analog replacement
Post by: szczuru on January 21, 2024, 11:45:08 AM

Strange is that even R3 isn't working (i've only replaced left analog). OK, i'll try to clean it one more time.

Title: Re: JDM-020 L3/R3 doesn't work after left analog replacement
Post by: zis2104 on January 21, 2024, 12:01:26 PM

Look picture of board jdm-020 and check of any part: resistor or capacitor are float or in wrong place

Title: Re: JDM-020 L3/R3 doesn't work after left analog replacement
Post by: zis2104 on January 21, 2024, 12:02:08 PM

You had use air gun right?

Title: Re: JDM-020 L3/R3 doesn't work after left analog replacement
Post by: szczuru on January 21, 2024, 12:49:47 PM

Nope, solering iron and wick